SETUP MENU A - Device orientation

From BEASTX Wiki
Jump to: navigation, search
This page is a translated version of the page Manuals:AR7210FblV5:Setupmenu A and the translation is 100% complete.


The AR7210BX receiver can be mounted in nearly all possible orientations. The only restriction is that the servo connection terminal has to point in or against flying direction and the egdes of the unit must be aligned in parallel to the rotation axis.


Dear customer, please note that this manual is still under construction! The pictures above show the MICROBEAST PLUS but the device orientation and layout of AR7210BX is similar!



Adjustment at the device

Select the orientation that the device is actually mounted on your heli by choosing the suitable Status LED color shown at SETUP MENU point A. You can switch between the options by briefly moving the rudder stick to one or the other direction. The Status-LED will change the color accordingly.

Status-LED Device orientation
off flat, sticker on top side, socket points in flight direction
purple flashing vertical, button is on the top, socket points in flight direction
purple flat inverted, sticker on bottom side, socket points in flight direction
red flashing vertical inverted, button is on the bottom, socket points in flight direction
red flat, sticker on top side, socket points to the tail boom
blue flashing vertical, button is on the top, socket points to the tail boom
blue flat inverted, sticker on bottom side, socket points to the tail boom
red/blue vertical inverted, button is on the bottom, socket points to the tail boom



Setup with StudioXm

Choose the orientation that the device is actually mounted on your heli by choosing the matching type in the app.

x250px