Bureaucrats, Administrators, translate-proofr
15,724
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: + + − <translate> − + +
no edit summary
<translate>
<!--T:1-->
{{TOC_MBPlus}}
{{TOC_MBPlus}}
{{DISPLAYTITLE:Parameter menu|noerror}}
{{DISPLAYTITLE:Parameter menu|noerror}}
The Parameter menu offers a variety of settings with which you can further improve the system performance and which allow you to adjust the flight characteristics of the helicopter to suit your personal preferences. Normally for the first flight you don‘t need to make any adjustments here. Only the control behavior ([[Manuals:MB_Plus:Parametermenu_B|menu point '''B''']]) and the stick deadband ([[Manuals:MB_Plus:Parametermenu_E|menu point '''E''']]) should be adapted under certain circumstances.<br />
The Parameter menu offers a variety of settings with which you can further improve the system performance and which allow you to adjust the flight characteristics of the helicopter to suit your personal preferences. Normally for the first flight you don‘t need to make any adjustments here. Only the control behavior ([[Manuals:MB_Plus:Parametermenu_B|menu point '''B''']]) and the stick deadband ([[Manuals:MB_Plus:Parametermenu_E|menu point '''E''']]) should be adapted under certain circumstances.<br />
<br />
<br />
When MICROBEAST PLUS is ready for operation, hold down the button until the Menu-LED next to point A flashes quickly and release the button immediately. The flashing menu LED '''A''' shows that you've entered [[Manuals:MB_Plus:Parametermenu_A|Parameter menu point '''A''']]. Do not hold the button too long, as this will enter [[Manuals:MB_Plus:Setupmenu_intro|Setup menu]]!<br />
When MICROBEAST PLUS is ready for operation, hold down the button until the Menu-LED next to point A flashes quickly and release the button immediately. The flashing menu LED '''A''' shows that you've entered [[Manuals:MB_Plus:Parametermenu_A|Parameter menu point '''A''']]. Do not hold the button too long, as this will enter [[Manuals:MB_Plus:Setupmenu_intro|Setup menu]]!<br />
[[Image:Setupmenu_open.png|x200px|none]]
<br />
[[Image:Parametermenu open.png|x180px|none]]
<br />
<br />
To switch to the next Parameter menu point, just briefly press the button once again. After the last menu point (depending on the installed feature set this can be menu point [[Manuals:MB_Plus:Parametermenu_H|'''H''']], [[Manuals:MB_Plus:Parametermenu_K|'''K''']] or [[Manuals:MB_Plus:Parametermenu_M|'''M''']]) pressing the button one more time exits the Parameter menu and MICROBEAST PLUS is ready for operation again (in this case the Status-LED will indicate the tail gyro mode and the LEDs A - N are off).<br />
To switch to the next Parameter menu point, just briefly press the button once again. After the last menu point (depending on the installed feature set this can be menu point [[Manuals:MB_Plus:Parametermenu_H|'''H''']], [[Manuals:MB_Plus:Parametermenu_K|'''K''']] or [[Manuals:MB_Plus:Parametermenu_M|'''M''']]) pressing the button one more time exits the Parameter menu and MICROBEAST PLUS is ready for operation again (in this case the Status-LED will indicate the tail gyro mode and the LEDs A - N are off).<br />