Translations:MICROBEAST PLUS RPM Governor - How to setup a Castle Creations ESC/1/en

From BEASTX Wiki
Revision as of 13:28, 29 July 2016 by FuzzyBot (talk | contribs) (Importing a new version from external source)
Jump to navigation Jump to search

Setup using the CastleLink Software

The RPM Governor function of MICROBEAST PLUS firmware version 4.0.0 does work very well with Castle Creations ESCs. The Castle Creations Phoenix EDGE series provide a separate rpm signal output, so despite the firmware with governor function there is nothing else needed to connect your ESC to MICROBEAST PLUS. When using a Castle Talon, ICE, ICE2 or similar ESC you additionally need to buy a rpm phase sensor, i.e.the BEASTX phase sensor BXA76013, so that MICROBEAST PLUS can detect the motor speed/rotor head speed of your helicopter. To connect and supply the rpm sensor with power you will also need the sensor adapter BX76401.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:MICROBEAST_PLUS_RPM_Governor_-_How_to_setup_a_Castle_Creations_ESC/1/en&oldid=11039"