Manuals:MB Plus:Intro

From BEASTX Wiki
Revision as of 13:33, 15 April 2015 by Shornstein (talk | contribs) (Created page with "<translate> Please note this site is under construction at the moment. Here we will offer a complete compendium for MICROBEAST PLUS Firmware Version 4.0.0 soon.<br /> <br /> ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Please note this site is under construction at the moment. Here we will offer a complete compendium for MICROBEAST PLUS Firmware Version 4.0.0 soon.

MICROBEAST PLUS - Instruction manual

MICROBEAST PLUS is the official successor of the famous MICROBEAST flybarless system. In comparance to MICROBEAST the hardware has been revised thoroughly to be on par with the state of the art. Latest MEMS sensors and faster processing gives a more precise control in all flight situations. If you have MICROBEAST already in use you will find that the setup of MICROBEAST PLUS runs as usual. The proven „EasySetup“ concept and ease of use is maintained. So upgrading to MICROBEAST PLUS is very easy.

As MICROBEAST PLUS is much more powerful than MICROBEAST, it is specifically tailored for use with the StudioX software solution that enables more complex adjustment processes thus resulting in completely new applications. We recommend to visit this wiki and our support website from time to time to get the latest features for your MICROBEAST PLUS.


Firmware version display - Version 4.x.x

Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 4.x.x!
The firmware version can be detected by connecting the unit to a computer by using the USB2SYS interface together with the StudioX software bundle .Also you can directly read on the MICROBEAST PLUS unit during the initialization phase what firmware version your MICROBEAST PLUS is running: MICROBEAST PLUS first carries out a brief LED test by lighting up all Menu-LEDs simultaneously, and cycling the Status-LED color (red->blue->purple). Then for about 3 seconds, the Status-LED lights red while the Menu-LEDs A to G display the first digit of the firmware version, and the LEDs H to N the second digit of the firmware version. By briefly pushing the button you can get more version informations displayed. In respect to the manual this information is not important. You will get more information about the version display in chapter 11.

Firmware version 4.0.x: In the left row menu LED C shows the mayor version „4“. In the row from LEDs H to N nothing lights up. So minor version is „0“ .