All translations
Jump to navigation
Jump to search
Enter a message name below to show all available translations.
Found one translation.
Name | Current message text |
---|---|
h English (en) | ==SBUS2 - control and telemetry== For bi-directional telemetry connect your SBUS2 signal wire either to the SYS port or to the DI2 port of your MICROBEAST ULTRA. In both cases it is mandatory to add a pull-down 4,7kOhm resistor between signal line and ground (minus). When using the DI2 port, also you need an adapter from standard servo connector to 5-pin JST as shown below. |