Cómo actualizar su dispositivo BEASTX/upgrade your BEASTX device

From BEASTX Wiki
Revision as of 06:19, 19 May 2017 by LuisGarAg (Talk | contribs) (Created page with "{{DISPLAYTITLE:Cómo actualizar su dispositivo BEASTX/upgrade your BEASTX device|noerror}} __TOC__ <br />")

Jump to: navigation, search


Puede pedir o comprar actualizaciones de firmware (si estan disponibles) y descargarlas a su dispositivo directamente desde StudioX Software. Normalmente se requieren tres pasos:

1. El dispositivo debe estar conectado a su ordenador y StudioX debe reconocerlo. La pantalla principal se abrirá mostrandole la información general del dispositivo:


2. Debe disponer de conexión a internet y debe estar conectado a la red freakware utilizando sus datos de acceso de fw Network. Si no lo esta, abra el diálogo de conexión haciendo click en el icono de la esquina superior izquierda, introduciendo sus credenciales o creando una nueva cuenta de usuario como se indica en here. Una vez dentro, la advertencia de la pantalla principal desaparecerá y tendrá acceso a los contenidos online disponibles como los manuales para su dispositivo y demás:


3. El dispositivo debe estar registrado en su cuenta de usuario. Haga click en el botón Register Device situado en la parte derecha para que el dispositivo sea asignado a su cuenta:


Una vez se realicen los pasos anteriores podrá tener acceso a los archivos de firmware para su dispositivo en la sección Online Content de la pantalla principal de StudioX. También habrá una nota mostrando que su dispositivo ha sido registrado:


Update procedure

If there are any update files available you can request them from the server. Firmware with Status "available" can be requested and will be generated once you double-click on the specific entry in the list. When file generation is finished Status will show "done" and you can download the firmware to your device by double-clicking the file entry again. Accept the confirmation dialog and the screen will show the progress of update procedure. Do not remove or power off the device during update process! When the update has finished the device will reboot and you will see the main screen again, showing the new firmware number and installed optional features.



Firmware files which may add more features and which are not for "free" (and that have not been bought already) can be bought by double-clicking on the specific file entry. In this case a PayPal payment dialog will open. When the payment has been processed the firmware file can be requested and downloaded as described above. Please note that depending on your payment method it can take some time (even some days) until the payment process is finished. The firmware will be available once the payment has been credited. Firmware is paid per device and can only be used for the specific device that the firmware has been bought for!

Upgrading optional firmware features can be done stepwise. Usually if you buy a lower priced feature the price will be accounted later when you want to upgrade one step further. Apart from StudioX have a look at the Device overview page of this Wiki to check latest upgrade options and prices.


When connecting my BEASTX device to the computer using the USB2SYS/SPMA3030 interface nothing happens. The device doesn't seem to be recognized by StudioX.

  • Make sure the wiring between interface and BEASTX device is plugged in correct polarity on both sides. If the blue LED of the USB interface is lit you've connected the wire not correctly. Usually the LED must be off. Only when data is transfered between device and interface the LED flashes randomly!
  • Make sure the USB interface is recognized by your operating system and all drivers and ports are installed correctly. Click here for further information.
  • Sometimes it can happen that other serial port devices may block the communication as StudioX searches all ports in fixed intervals. To prevent this reconfigure the StudioX Plugin configuration so that only the specifically assigned com port of your USB interface is used. When doing this please be very careful to set the parameters of "Plugin configuration" correctly otherwise you may lock the necessary serial port instead of explicitly using it. Click here for further information.