Difference between revisions of "Translations:BEASTX Updater Classic/49/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
(Importing a new version from external source)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
−
IMPORTANT: The MICROBEAST will not be powered from the USB2SYS-Interface, so the MICROBEAST must be supplied with power from a different source BEFORE you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).
+
The BEASTX device will not be powered from the USB2SYS-Interface! So the unit must be supplied with power from a different source
 +
before(!) you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).

Latest revision as of 18:29, 6 August 2018

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (BEASTX Updater Classic)
 The BEASTX device will not be powered from the USB2SYS-Interface! So the unit must be supplied with power from a different source
 before(!) you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).
Translation The BEASTX device will not be powered from the USB2SYS-Interface! So the unit must be supplied with power from a different source
 before(!) you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).
The BEASTX device will not be powered from the USB2SYS-Interface! So the unit must be supplied with power from a different source
before(!) you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).
Retrieved from "https://wiki.beastx.com/index.php?title=Translations:BEASTX_Updater_Classic/49/en&oldid=16384"