Difference between revisions of "Translations:Help:FAQ/46/en"
Jump to navigation
Jump to search
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 1: | Line 1: | ||
| − | * Is the correct type of receiver selected in the [[Manuals:MB_Plus:Receiver_setup_intro|receiver setup menu]]? Particularly when using a Spektrum® radio system note that receivers like Spektrum® AR6100, 7000, 9000 etc. are "Standard" receivers! The selection of "Spektrum®" in the receiver setup menu only applies for direct connection of one single Spektrum | + | * Is the correct type of receiver selected in the [[Manuals:MB_Plus:Receiver_setup_intro|receiver setup menu]]? Particularly when using a Spektrum® radio system note that receivers like Spektrum® AR6100, 7000, 9000 etc. are "Standard" receivers! The selection of "Spektrum®" in the receiver setup menu only applies for direct connection of one single Spektrum satelite with the optional available adapter. In general when using a serial-wire receiver check if the Status-LED lights up in "blue" color at [[Manuals:MB_Plus:Receiver_setup_menu_B|Receiver setup menu point '''B''']] indicating there is a valid signal coming from the receiver. |
* When using a Standard receiver check the wiring. Mainly check receiver wires for polarity on both sides and correct plugging (no vertical offset by one pin). | * When using a Standard receiver check the wiring. Mainly check receiver wires for polarity on both sides and correct plugging (no vertical offset by one pin). | ||
* MICROBEAST/MICROBEAST PLUS: Check binding between transmitter and receiver. | * MICROBEAST/MICROBEAST PLUS: Check binding between transmitter and receiver. | ||
* AR7200BX/AR7300BX: Check binding between transmitter and receiver.<br /> | * AR7200BX/AR7300BX: Check binding between transmitter and receiver.<br /> | ||
<br /> | <br /> | ||
Revision as of 11:02, 18 June 2015
- Is the correct type of receiver selected in the receiver setup menu? Particularly when using a Spektrum® radio system note that receivers like Spektrum® AR6100, 7000, 9000 etc. are "Standard" receivers! The selection of "Spektrum®" in the receiver setup menu only applies for direct connection of one single Spektrum satelite with the optional available adapter. In general when using a serial-wire receiver check if the Status-LED lights up in "blue" color at Receiver setup menu point B indicating there is a valid signal coming from the receiver.
- When using a Standard receiver check the wiring. Mainly check receiver wires for polarity on both sides and correct plugging (no vertical offset by one pin).
- MICROBEAST/MICROBEAST PLUS: Check binding between transmitter and receiver.
- AR7200BX/AR7300BX: Check binding between transmitter and receiver.