Translations:Help:FAQ:Servos/6/en

Adjusting servo deflection in the transmitter does not work.

I use DualRate in my radio to decrease rotation rates / cyclic pitch but MICROBEAST / MICROBEAST PLUS still drives my servos to full deflection when testing on the workbench!?

This is absolutely normal and doesn't say anything about the rotation rates you will see in flight. Similar to the tail gyro in HeadingLock mode the system measures rotation rates and tries to maintain the rotation rate that is commanded by stick input. It automatically finds the necessary amount pitch to maintain the rate. Now if you move the stick while the heli is standing on the ground you tell the system to rotate the heli with a given speed. The system measures the speed and sees that nothing happens. So it will apply more and more servo input in order to move the heli but as the heli won't move the servos will be driven to the maximum allowed deflection.

Measuring and limiting the cylic pitch is counterproductive and not necessary. Always allow the system to have as much pitch as possible. Decreasing the rotation rate simply is done by decreasing the stick output signal. This can be done on transmitter side using the DualRate function or on MICROBEAST side changing the Control style at Parameter menu point B.