Translations:Help:FAQSpektrum:Attitude/76/en

I can't activate the AttitudeControl although it is switched on at Parameter menu point L. How can I find out which channel controls the Attitude mode?

When there was no channel assigned for the AttitudeControl in FUNCTION MENU the gyro channel is used to activate the AttitudeControl. So if you move the gyro channel to negative direction, the Status LED should light in red color, the menu LED should wander up the further the move the gyro channel into negative direction indicating the amount of AttitudeControl gain. If on the other hand the Status LED gets purple this indicates that the tail gyro is operated in "Rate-Mode" and AttitudeControl uses a separate channel. So move all available free channels on the radio (channel 7, 8 or 9) to see which will influence the attitude status (Status LED changing to red).

Alternatively open FUNCTION MENU (power off the device, push the button and power on while holding the button) and reassign the switch channel for AttitudeControl either by moving the switch on the transmitter at menu point B or by skipping menu point B in order to use the gyro channel for the AttitudeControl.

As third alternative use the StudioX app to see which channel is assigned to control the stabilization or to reassign the control.