Translations:Manuals:BXFbl:Hardware Installation/7/en

From BEASTX Wiki
Revision as of 11:15, 24 April 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
Jump to navigation Jump to search

Make sure that the mounting platform is perpendicular to the main shaft! On the other hand it's not important that the unit is directly placed on all the rotation axis (which is nearly impossible). Also it's not important that the system is placed in parallel to the ground or not.



MICROBEAST PLUS / MICROBEAST ULTRA

The servo connector pins must always point towards the front or rear of the helicopter. The small white sensor pinboard on the side must always be in line with flight direction.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Hardware_Installation/7/en&oldid=23349"