Translations:Manuals:MBPlusFblV5:Radio System/3/en

From BEASTX Wiki
Revision as of 12:13, 15 November 2017 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Receiver installation

MICROBEAST PLUS can work with a lot of different receiver types and radio brands and especially with different types of signal protocols. Depending on which signal protocol you intend to use for controlling the MICROBEAST PLUS the wiring layout may vary. In the following you can see all supported protocols and specific wiring scheme for each receiver type. Ensure a tight fit of the connectors. The pin board of MICROBEAST PLUS is designed so that the plugs firmly clamp each other when they are fully inserted. Anyhow, especially when using a receiver with single wire output it is possible that connectors are plugged in with no adjacent neighbors. Such plugs should additionally be secured against loosening.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBPlusFblV5:Radio_System/3/en&oldid=12384"