Difference between revisions of "Translations:Manuals:MBPlusFblV5:Setupmenu intro/5/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
(Importing a new version from external source)
 
Line 5: Line 5:
 
</p>
 
</p>
 
<br />
 
<br />
−
{{WARNING_QUOTE|'''Never fly while MICROBEAST PLUS is in SETUP MENU!''' In this condition the gyro control and the stick controls are disabled.}}<br />
+
{{WARNING_QUOTE|'''Never fly while MICROBEAST PLUS is in SETUP MENU or any other menu!''' In this condition the gyro control and the stick controls are disabled.}}<br />

Latest revision as of 11:38, 11 December 2017

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV5:Setupmenu intro)
<p>
When in SETUP MENU you can reset all settings of the device to their factory default value. To do so hold down the button at any menu point of SETUP MENU for at least 10 seconds, then release. After doing so you will not be able to fly anymore! You have to do all the basic heli setup again and also all the other settings from PARAMETER MENU will be reset!! There are 2 exceptions:
* When you press down and hold the button at Menu Point H (Servo trims) only the servo trims will be reset to 0. Holding the button will not cause a full factory reset here.
* For the settings of RECEIVER MENU there is no such factory reset intended. The reset in SETUP MENU will only reset settings that are not receiver related. To change receiver related things like receiver type, function assignment or throttle failsafe simply perform the setup of RECEIVER MENU again.
</p>
<br />
{{WARNING_QUOTE|'''Never fly while MICROBEAST PLUS is in SETUP MENU or any other menu!''' In this condition the gyro control and the stick controls are disabled.}}<br />
Translation<p>
When in SETUP MENU you can reset all settings of the device to their factory default value. To do so hold down the button at any menu point of SETUP MENU for at least 10 seconds, then release. After doing so you will not be able to fly anymore! You have to do all the basic heli setup again and also all the other settings from PARAMETER MENU will be reset!! There are 2 exceptions:
* When you press down and hold the button at Menu Point H (Servo trims) only the servo trims will be reset to 0. Holding the button will not cause a full factory reset here.
* For the settings of RECEIVER MENU there is no such factory reset intended. The reset in SETUP MENU will only reset settings that are not receiver related. To change receiver related things like receiver type, function assignment or throttle failsafe simply perform the setup of RECEIVER MENU again.
</p>
<br />
{{WARNING_QUOTE|'''Never fly while MICROBEAST PLUS is in SETUP MENU or any other menu!''' In this condition the gyro control and the stick controls are disabled.}}<br />

When in SETUP MENU you can reset all settings of the device to their factory default value. To do so hold down the button at any menu point of SETUP MENU for at least 10 seconds, then release. After doing so you will not be able to fly anymore! You have to do all the basic heli setup again and also all the other settings from PARAMETER MENU will be reset!! There are 2 exceptions:

  • When you press down and hold the button at Menu Point H (Servo trims) only the servo trims will be reset to 0. Holding the button will not cause a full factory reset here.
  • For the settings of RECEIVER MENU there is no such factory reset intended. The reset in SETUP MENU will only reset settings that are not receiver related. To change receiver related things like receiver type, function assignment or throttle failsafe simply perform the setup of RECEIVER MENU again.


Warning.png Never fly while MICROBEAST PLUS is in SETUP MENU or any other menu! In this condition the gyro control and the stick controls are disabled.


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBPlusFblV5:Setupmenu_intro/5/en&oldid=13063"