Translations:Manuals:MBUltraFblV5:Setupmenu intro/2/en

From BEASTX Wiki
Revision as of 10:33, 28 February 2023 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

MICROBEAST ULTRA offers different type of menu structures for different needs of adjustment. Before the first flight, MICROBEAST ULTRA has to be setup to your helicopter mechanics and its components. This basic setup is done in the SETUP MENU.


If not already done, power up your radio and MICROBEAST ULTRA and wait until initialization sequence is finished:

  • At first the system will calibrate to the radio system, Menu LEDs H to N will cycle up and down. During this time do not move the sticks on your radio as the system is learning the stick mid positions.
  • In the second step MICROBEAST ULTRA checks if the sensors are working correctly and learns the sensor rest positions. Here Menu LEDs A to G will cycle up and down. During this time do not move the helicopter.


When initialization is completed the Status LED will change to blue or purple color indicating the current gyro mode. If you can't get through the initialization sequence either because LEDs A-G or LEDs H-N don't stop cycling please read the FAQ. Note that during initialization pressing the button has no significant effect and you will not be able to enter any menu.