Translations:Manuals:MB Plus:Intro/3/en

From BEASTX Wiki
Revision as of 14:44, 13 May 2015 by FuzzyBot (talk | contribs) (Importing a new version from external source)
Jump to navigation Jump to search

Firmware version display


Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 4.x.x!


The firmware version can be detected by connecting the unit to a computer by using the USB2SYS interface together with the StudioX software bundle .Also you can directly read on the MICROBEAST PLUS unit during the initialization phase what firmware version your MICROBEAST PLUS is running: MICROBEAST PLUS first carries out a brief LED test by lighting up all Menu-LEDs simultaneously, and cycling the Status-LED color (red->blue->purple). Then for about 3 seconds, the Status-LED lights red while the Menu-LEDs A to G display the first digit of the firmware version, and the LEDs H to N the second digit of the firmware version. By briefly pushing the button you can get more version informations displayed. In respect to the manual this information is not important. You will get more information about the version display in chapter 11.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MB_Plus:Intro/3/en&oldid=5949"