MICROBEAST PLUS HD

From BEASTX Wiki
Revision as of 09:23, 30 April 2015 by FuzzyBot (talk | contribs) (Importing a new version from external source)
Jump to navigation Jump to search 
The operation of MICROBEAST PLUS HD is identical to MICROBEAST PLUS apart from the high power supply and the switch system. So it is not
explicitly dealt with the HD version later on in this manual. All subsequent executions are also based on MICROBEAST PLUS HD!
Instruction manual

1. Introduction

2. Box content and accessories

3. MICROBEAST PLUS HD

4. Preliminary steps

5. Receiver installation

6. Optional features explanation

7. Receiver setup menu
A - Receiver type (signal input)
B - Channel to function assignment
N - Throttle failsafe position
8. Setup menu
A - Device orientation
B - Swashplate update rate
C - Rudder servo center pulse
D - Rudder servo update rate
E - Rudder servo limits
F - Tail gyro direction
G - Swashplate servo trim
H - Swashplate mixing type
I - Swashplate servo directions
J - Swashplate servo throw
K - Collective pitch
L - Swashplate servo limit
M - Swashplate gyro directions
N - Internal RPM Governor
9. Parameter menu
A - Quick trim
B - Control style
C - Speed flight stability
D - Rudder rate consistency
E - Stick deadzone
F - Torque precompensation
G - Cyclic response
H - Pitch boost
I - Throttle response
J - Slow rampup speed
K - Fast rampup speed
L - AttitudeControl mode
M - AttitudeControl pitch
10. Governor setup menu
A - Test mode
B - Throttle low position
C - Throttle high position
D - Transmitter setup
E - Signal divider
F|G|H - Main gear ratio

11. Flying and optimization

12. Usage of RPM Governor (optional)

13. Usage of AttitudeControl (optional)


Download PDF

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MB_Plus:Intro_3/1/en&oldid=4878"