Translations:Manuals:MB Plus:Setupmenu N/1/de

From BEASTX Wiki
Revision as of 12:33, 29 May 2015 by Shornstein (talk | contribs)
Jump to navigation Jump to search
Instruction manual

1. Introduction

2. Box content and accessories

3. MICROBEAST PLUS HD

4. Preliminary steps

5. Receiver installation

6. Optional features explanation

7. Receiver setup menu
A - Receiver type (signal input)
B - Channel to function assignment
N - Throttle failsafe position
8. Setup menu
A - Device orientation
B - Swashplate update rate
C - Rudder servo center pulse
D - Rudder servo update rate
E - Rudder servo limits
F - Tail gyro direction
G - Swashplate servo trim
H - Swashplate mixing type
I - Swashplate servo directions
J - Swashplate servo throw
K - Collective pitch
L - Swashplate servo limit
M - Swashplate gyro directions
N - Internal RPM Governor
9. Parameter menu
A - Quick trim
B - Control style
C - Speed flight stability
D - Rudder rate consistency
E - Stick deadzone
F - Torque precompensation
G - Cyclic response
H - Pitch boost
I - Throttle response
J - Slow rampup speed
K - Fast rampup speed
L - AttitudeControl mode
M - AttitudeControl pitch
10. Governor setup menu
A - Test mode
B - Throttle low position
C - Throttle high position
D - Transmitter setup
E - Signal divider
F|G|H - Main gear ratio

11. Flying and optimization

12. Usage of RPM Governor (optional)

13. Usage of AttitudeControl (optional)


Download PDF

Dieser Einstellpunkt kann nur bei einer Firmware mit Drehzahlregler angewählt werden. Ausserdem muss ein SingleLine-Empfänger verwendet werden. Der Drehzahlregler kann nicht mit einem Standard Empfänger verwendet werden.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MB_Plus:Setupmenu_N/1/de&oldid=6755"