Translations:Help:StudioX/10/en
Jump to navigation
Jump to search
StudioXm does not find the BLE2SYS bluetooth interface when refreshing the interface list
- Make sure bluetooth is switched on at your smartphone/tablet.
- Do NOT connect to the BLE2SYS device using the bluetooth menu of your smartphone/tablet, StudioXm will establish connection by itself!
- BLE2SYS uses bluetooth smart (bluetooth LE), make sure your mobile device supports this specific bluetooth protocol.
- Make sure the LED on the BLE2SYS flashes in intervals of 2 seconds. By default the interface deactivates after 30 seconds whe there is no connection. In this case the LED is off. You have to cylce power in order to reactivate the device.
- Click "Rescan" to start searching for bluetooth device in StudioX. Usually you should see some device called "BLE2SYS". But the name can be different especially when you've bought a used device from someone else. There can be other devices with long numbers like "Unknown{(12345....)}". Do not try to connect to those, these are different bluetooth devices around that can't be indentified.
- When the device list is empty, check if Studiox is allowed to use bluetooth (location) in the phone settings