View source for Help:FAQSpektrum:Attitude

__TOC__
<translate>
{{DISPLAYTITLE:AttitudeControl (Rescue bailout and stabilization)|noerror}}

=How can I get the PROEDITION upgrade with AttitudeControl (Rescue bail out)? What does it cost and why isn't it for free?=
To upgrade your SPEKTRUM AR7210BX to PROEDITION with rescue bailout you need a computer or smartphone/tablet with the StudioXm app and a suitable interface to connect to your device (BLE2SYS bluetooth interface for smartphone, USB2SYS serial interface for computers). When connected to the device, in the app you go to "Firmware Update", log in or register to the freakware network and then you will see all available updates (requires internet connection). Usually your AR7210BX comes with BASIC firmware which means the device has everything you need to fly a rc helicopter, 3 axis gyro for swashplate and rudder plus internal headspeed governor for controling the throttle. Additionally we offer update files for the socalled PROEDITION. Here you get additional functionality like AttitudeControl for rescue bailout and horizontal stabilization and bank switching, which allows the intermediate pilot to further customize the system to all of his needs. As this functions are not required by any pilot, you don't have to pay for them if you don't need them. On the other hand if you like to have such special features you can upgrade your device by paying 99 Euros once. Then the download is unlocked in the software and you can flash the PROEDITION firmware from the StudioXm app to your device. To buy the device upgrade please go to the [https://www.freakware.de/p/ar7210bx-upgrade-v4-auf-v5-professional-beastx-ar-upg-v4-a158498.htm freakware webshop] or click the upgrade button in the StudioXm app. When the payment is finished your device is leveled up and you can download the PROEDITION firmware in StudioXm.<br />
<br />

=When I have upgraded to PROEDITION will I have to pay each time a new update comes out?=
No, you only have to pay once. Then your device is leveled up and you can download all PROEDITION firmware files now and in future.<br />
<br />
<br />

=I've bought a used device. The owner says it was upgraded to PROEDITION. Will I get PROEDITION updates in future?=
Yes, of course. Please contact us in order to move the device registration to your freakware Net account. Then you can download firmware updates for the device from the StudioXm App.<br />
<br />
<br />

=I've bought a used device. The owner says it was upgraded to PROEDITION. How can I make sure?=
When PROEDITION firmware is installed on the device you can choose the AttitudeControl mode (stabilization mode) at PARAMETER MENU point L. Otherwise the menu point L will not appear and the PARAMETER MENU ends after menu point K. Also you can check by connecting your AR7210BX to the computer or smartphone using the USB2SYS/BLE2SYS interface. In the StudioXm app you can see on the device overview page which features are installed on the device.<br />
<br />
<br />

=Can I transfer PROEDITION to another device= <!--T:73-->
No, this is not possible and somehow senseless. If you have problems with a device or your device got damaged please contact us.<br />
<br />
<br />

=Can I update as much devices to PROEDITION as I like or will I have to pay for each device separately?= <!--T:73-->
The upgrade is paid per device, you can't update other devices with one "license".<br />
<br />
<br />

=Do you offer discount on the PROEDITION upgrade?= <!--T:73-->
Usually not. If you're a vendor please contact our [mailto:reseller@freakware.com sales team].<br />
<br />
<br />

=Is AttitudeControl (rescue bail out) also available for the SPEKTRUM AR7200BX/AR7300BX?= <!--T:74-->
No, unfortunately this features can only be offered for AR7210BX and MICROBEAST PLUS / MICROBEAST PLUS HD. Older devices can't be used due to limitations of the hardware.<br />
<br />
<br />

=Parameter menu point L (choosing Attitude mode) does not appear. After menu point K you leave the menu.= <!--T:81-->
Obviously your device doesn't seem to have the PROEDITION firmware with AttitudeControl feature installed. You can check this by connecting your AR7210BX to the computer or smartphone using the USB2SYS/BLE2SYS interface. In the StudioXm app you can see on the device overview page which features are installed on the device. Use StudioXm to upgrade the firmware to PROEDITION.<br />
<br />
<br />

=I can't activate the AttitudeControl although it is switched on at Parameter menu point L. How can I find out which channel controls the Attitude mode?= <!--T:76-->
When there was no channel assigned for the AttitudeControl in FUNCTION MENU the gyro channel is used to activate the AttitudeControl. So if you move the gyro channel to negative direction, the Status LED should light in red color, the menu LED should wander up the further the move the gyro channel into negative direction indicating the amount of AttitudeControl gain. If on the other hand the Status LED gets purple this indicates that the tail gyro is operated in "Rate-Mode" and AttitudeControl uses a separate channel. So move all available free channels on the radio (channel 7, 8 or 9) to see which will influence the attitude status (Status LED changing to red).<br />
<br />
Alternatively open FUNCTION MENU (power off the device, push the button and power on while holding the button) and reassign the switch channel for AttitudeControl either by moving the switch on the transmitter at menu point B or by skipping menu point B in order to use the gyro channel for the AttitudeControl.<br />
<br />
As third alternative use the StudioX app to see which channel is assigned to control the stabilization or to reassign the control.<br />
<br />
<br />

=Using the tail gyro gain to activate AttitudeControl, how can I control AttitudeControl and switch the tail gyro gain with flight mode switch?= <!--T:77-->
If applicable you may use the free programmable mixing functions of your transmitter to mix your AttitudeControl switch on the tail gyro gain output. To enable AttitudeControl you must reverse the sign of the tail gyro gain channel. So by flipping the AttitudeControl switch you must subtract or add enough channel output so that the gyro gain channel will give the amount of desired AttitudeControl gain. In the following example it is shown how this may work out on a Spektrum DX18. We use switch H to activate/deactivate AttidueControl. The AttitudeControl gain is 50% (-50% channel output in this example).<br />
<br />
{|class="gallery"
|- 
|width="200pt" style="padding:0px 20px;"|[[Image:AttitudeControl_Spektrum_1.JPG|192px|none|border]]
|width="200pt" style="padding:0px 20px;"|[[Image:AttitudeControl_Spektrum_2.JPG|192px|none|border]]
|width="200pt" style="padding:0px 20px;"|[[Image:AttitudeControl_Spektrum_4.JPG|192px|none|border]]
|width="200pt" style="padding:0px 20px;"|[[Image:AttitudeControl_Spektrum_3.JPG|192px|none|border]]
|-
|width="200pt" style="padding:0px 20px;"|Create a new programmable mixer
|width="200pt" style="padding:0px 20px;"|Here we just use a very simple mixer from Switch H to GYR channel
|width="200pt" style="padding:0px 20px;"|As the gyro channel (GYR) is 50% at the moment we subtract 100%
|width="200pt" style="padding:0px 20px;"|So when flipping the switch the channel moves to -50%
|}
We use a mixer from switch H to the GYR channel that subtracts 100% when flipping the switch. As the gyro gain may differ between different flight modes you can create one mixer for each flight mode. Each mixer subtracts as much as necessary to get always the same amount of AttitudeControl gain (in our example -50%).<br />
<br />
{|class="gallery"
|- 
|width="200pt" style="padding:0px 20px;"|[[Image:AttitudeControl_Spektrum_5.JPG|192px|none|border]]
|width="200pt" style="padding:0px 20px;"|[[Image:AttitudeControl_Spektrum_9.jpg|192px|none|border]]
|width="200pt" style="padding:0px 20px;"|[[Image:AttitudeControl_Spektrum_7.JPG|192px|none|border]]
|width="200pt" style="padding:0px 20px;"|[[Image:AttitudeControl_Spektrum_6.JPG|192px|none|border]]
|width="200pt" style="padding:0px 20px;"|[[Image:AttitudeControl_Spektrum_8.jpg|192px|none|border]]
|-
|width="200pt" style="padding:0px 20px;"|Mix1 subtracts 100% to get -50% in flight mode 1
|width="200pt" style="padding:0px 20px;"|Create a similar mixer for flight mode 2
|width="200pt" style="padding:0px 20px;"|In flight mode 2 gyro gain is 58%
|width="200pt" style="padding:0px 20px;"|Mix2 subtracts 108% to get -50% in flight mode 2
|width="200pt" style="padding:0px 20px;"|Create additional mixer for the other flight modes if necessary
|}<br />
<br />
<br />

=When switching on AttitudeControl on the workbench and moving the heli by hand the servos sometimes make some jerky movements= <!--T:78-->
This is absolutely normal behavior as the system doesn't simply apply full aileron, elevator or pitch input. The control input works in a much more sophisticated way. There are different curves and algorithm in the software which apply control input in a very special manner so the heli will be turned and leveled without loosing height and without moving to much around as good as possible. When turning the helicopter on the workbench this can cause some oscillations or bigger steps in servo movement (servo jumping) as the helicopter does not turn the same as it would do in reality.<br />
<br />
<br />

=AttitudeControl does not level my helicopter perfectly= <!--T:79-->
''On the ground everything seems perfect and even the first time I switch on AttitudeControl in flight on the helis levels OK. But after some time the heli is (extremely) tilted to the side when I switch on AttitudeControl again.''<br />
<br />
The AR7210BX AttitudeControl (SAFE mode) uses gyro sensors and accelerometers to build up the artificial horizon which is necessary to determine the heli's absolute position in space. This artificial horizon is highly dependent on the sensor data input and if the sensors fail, also the artificial horizon will. The sensors can especially be influenced by vibrations which cause them to show wrong data or loose some data at all. This will cause wrong calculations and in consequence cause a wrong repositioning of the heli. The gyro sensors of AR7210BX typically are very vibration resistant and you might not see the influence of vibrations in normal flight without AttitudeControl. But as the calculation of the artificial horizon mainly is a big sum of all the sensor inputs, even the smallest influence can cause an offset of the system. Additionally the accelerometers are much more sensitive to vibrations than the gyro sensors. As these are not used in normal flight most of the time, you will not see a direct influence of vibrations on them. But for the AttitudeControl these sensors have an important role and the system can only work with limited capability if these sensors fail.<br />
<br />
* Make sure the system is perfectly aligned to the helicopter's rotation axis. Otherwise the measurements will be incorrect by principle.
* Make sure the system is not touching the helicopter's canopy and loose wires can't hit the device in flight.
* Please make sure your helicopter is running smooth and absolutely free of vibrations. Particularly with very small electric helis this is sometimes a difficult task, as there is not much mass to compensate for the vibrations and all electric components are placed very close to each other. If you see or hear any abnormalities like twitching tail or loud, vibrant noise it is very likely the AttitudeControl will not work as expected. You may try to place the AR7210BX unit at a different location on the heli or mount it with a different sort of gyro pad to compensate for those vibrations. Anyhow the best solution is to find the source of vibration, i.e. by removing tail and main blades and letting the motor run on the ground, and change defective/unbalanced parts. With the StudioXm App you can run a vibration analysis and see if there is some very high spot at a specific frequency. From this frequency you can conclude <br />
<br />
* High temperature changes can cause the sensors to drift and in consequence cause the artificial horizon get offset. When it's very cold outside or very hot make sure the system can acclimatize when moving the helicopter from warm to cold or from cold to warm, before powering it up and flying.<br />
<br />
<br />

</translate>