View source for Manuals:MB Plus:Governormenu intro

<translate>
{{TOC_MBPlus}}
{{DISPLAYTITLE:Governor setup menu|noerror}}
If the RPM Governor was activated at [[Manuals:MB_Plus:Setupmenu_N|Setup menu point '''N''']] (setting „electric“ or „nitro“) then you can access the Governor menu immediately afterwards. Here various helicopter-specific information must be provided which is necessary so that the RPM Governor can function correctly. Moreover, the transmitter will be prepared for the use with the RPM Governor function and at [[Manuals:MB_Plus:Governormenu_A|menu point '''A''']] a function test for the rpm sensor is performed.<br />
<br />
'''Note:''' [[Manuals:MB_Plus:Setupmenu_N|Setup menu point '''N''']] and in consequence the Governor setup menu points are only accessible if you have installed the RPM Governor feature on your device and in case you're using a [[Manuals:MB_Plus:Receiver_Installation/en#Single-Line_receivers|single-line receiver]]. The RPM Governor function is not applicable when a [[Manuals:MB_Plus:Receiver_Installation/en#Standard_receivers|Standard receiver]] is used!<br />
</translate>