Manuals:MBPlusFblV5:Setupmenu E/en - Revision history

FuzzyBot: Importing a new version from external source

2019-07-10T19:58:06Z

Importing a new version from external source

← Older revision		Revision as of 19:58, 10 July 2019
Line 44:		Line 44:

	=Setup with StudioXm=		=Setup with StudioXm=
			1. When you move the rudder stick to full deflection, the Status LED on the MICROBEAST PLUS should light solid and the label ''right'' or ''left'' should change the color accordingly. If the stick is not moving far enough, you will see the message "Increase!" In this case '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position''' and the label will disappear in the software. Repeat this for the other direction. Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when raching the end position.<br />
	<br />		<br />
	~~[[File~~:~~SetupEF_mobile~~.~~png\|x250px]]~~		<div class="iosgallery">
			<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20037.PNG">
			<div class="iostext">Stick moved into one direction, deflection not enough</div>
			</div>
			<div class="iosgallery">
			<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20038.PNG">
			<div class="iostext">Stick moved into one direction, maximum position reached</div>
			</div>
	<br />		<br />
	<br />		<br />
	1. ~~When you move~~ the rudder stick to ~~full deflection,~~ the ~~Status LED on~~ the MICROBEAST PLUS ~~should light solid and~~ the ~~label~~ ''right'' or ''~~left~~'' ~~should change the~~ color ~~accordingly~~. If the stick ~~is not moving far enough, you will see~~ the ~~message~~ "~~Increase!~~" ~~In this case~~ '''~~increase the servo throw~~/~~endpoint of the rudder channel in the transmitter just as far so that~~ the Status LED ~~changes from flashing to solid when~~ the ~~rudder stick reaches~~ the ~~end position~~''' ~~and the label will disappear~~ in the software. ~~(Note~~: ~~Do not increase the endpoint too much in the transmitter~~. ~~We need an exact match of full stick position and stick end position~~. ~~So the Status LED should just change from flashing to solid when raching the end position~~.)<br />		2. Now connect the rudder servo to [CH4] port of MICROBEAST PLUS as described above and check the rudder direction on the helicopter. '''If the stick is moving the servo into the wrong direction use the servo reverse function of your transmitter''' and reverse the rudder channel to set stick control direction correctly. Now when the servo is moving correctly set the rudder direction of the MICROBEAST PLUS gyro: When you move the rudder stick/servo to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left), reverse the display (internal control direction) by choosing either ''normal'' or ''inverted'' in the software.'''<br />
			<br />
			<div class="iosgallery">
			<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20038.PNG">
			<div class="iostext">Stick moved left, but label shows right</div>
			</div>
			<div class="iosgallery">
			<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20041.PNG">
			<div class="iostext">Stick moved left, label shows left</div>
			</div>
	<br />		<br />
	2. Now connect the rudder servo to [CH4] port of MICROBEAST PLUS as described above and check the rudder direction on the helicopter. '''If the stick is moving the servo into the wrong direction use the servo reverse function of your transmitter''' and reverse the rudder channel to set stick control direction correctly. Now when the servo is moving correctly set the rudder direction of the MICROBEAST PLUS gyro: When you move the rudder stick/servo to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left), reverse the display (internal control direction) by choosing either ''normal'' or ''inverted'' in the software.'''<br />
	<br />		<br />
	3. Finally adjust the servo limit by changing the values in the two adjustment boxes for each direction. To do so, carefully use the rudder stick to move the servo to the endpoint (watch out to not jam the servo) and increase/decrease the endpoint as necessary.<br />		3. Finally adjust the servo limit by changing the values in the two adjustment boxes for each direction. To do so, carefully use the rudder stick to move the servo to the endpoint (watch out to not jam the servo) and increase/decrease the endpoint as necessary.<br />
			<br />
			<div class="iosgallery">
			<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20040.PNG">
			<div class="iostext"></div>
			</div>
			<br />
	<br />		<br />
	{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the app and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the servo.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />		{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the app and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the servo.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />

FuzzyBot: Updating to match new version of source page

2019-07-10T19:58:03Z

Updating to match new version of source page

@@ Line 41: / Line 41: @@
 <br />
 '''In addition you can check the gyro direction by turning the helicopter by hand around its vertical axis.''' When turning the heli the gyro must move the servo so that the rotor will produce a counter action agains the turn direction. So later in flight the gyro will stop the helicopter from unwanted movement. Here the LED will light up in '''blue''' color when you turn the helicopter to the '''right''' and light up in '''red''' when you turn it to the '''left'''. So you can get a little reminder when you do not know which is the correct stick direction to setup, when you need to do the setup later on the field!}}<br />
 <br />

FuzzyBot: Importing a new version from external source

2018-01-12T07:55:28Z

Importing a new version from external source

← Older revision		Revision as of 07:55, 12 January 2018
Line 1:		Line 1:
	~~{{TOC_MBPlusV5\|Manuals:MBPlusFblV5:Setupmenu_D/en\|Manuals:MBPlusFblV5:Setupmenu_G/en}}~~
	{{DISPLAYTITLE:SETUP MENU E & F - Rudder limits and control direction\|noerror}}		{{DISPLAYTITLE:SETUP MENU E & F - Rudder limits and control direction\|noerror}}
			{{TOC_MBPlusV5\|Manuals:MBPlusFblV5:Setupmenu_D/en\|Manuals:MBPlusFblV5:Setupmenu_G/en\|SETUPMENU}}
	__TOC__		__TOC__
	<br />		<br />

FuzzyBot: Importing a new version from external source

2018-01-12T06:56:37Z

Importing a new version from external source

← Older revision		Revision as of 06:56, 12 January 2018
Line 1:		Line 1:
			{{TOC_MBPlusV5\|Manuals:MBPlusFblV5:Setupmenu_D/en\|Manuals:MBPlusFblV5:Setupmenu_G/en}}
	{{DISPLAYTITLE:SETUP MENU E & F - Rudder limits and control direction\|noerror}}		{{DISPLAYTITLE:SETUP MENU E & F - Rudder limits and control direction\|noerror}}
	~~{{TOC_MBPlusV5}}~~
	__TOC__		__TOC__
	<br />		<br />

FuzzyBot: Importing a new version from external source

2017-11-30T14:49:59Z

Importing a new version from external source

← Older revision		Revision as of 14:49, 30 November 2017
Line 36:		Line 36:
	2. Now set the rudder direction of the MICROBEAST PLUS gyro: When you move the rudder stick to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left) reverse the display (internal control direction) by tapping the aileron(!) stick once.'''<br />		2. Now set the rudder direction of the MICROBEAST PLUS gyro: When you move the rudder stick to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left) reverse the display (internal control direction) by tapping the aileron(!) stick once.'''<br />
	<br />		<br />
	3. Optional: When you move the rudder stick to full deflection, the Status LED should light solid, not just flash. If this is not the case, '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position'''. (Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when ~~reaching~~ the end position.)<br />		3. Optional: When you move the rudder stick to full deflection, the Status LED should light solid, not just flash. If this is not the case, '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position'''. (Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when raching the end position.)<br />
	<br />		<br />
	{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the servo.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />		{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the servo.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />
	<br />		<br />
	'''In addition you can check the gyro direction by turning the helicopter by hand around its vertical axis.''' When turning the heli the gyro must move the servo so that the rotor will produce a counter action agains the turn direction. So later in flight the gyro will stop the helicopter from unwanted movement. Here the LED will light up in '''blue''' color when you turn the helicopter to the '''right''' and light up in '''red''' when you turn it to the '''left'''. ~~This is to give~~ you a little reminder when you need to do the setup later on the field ~~and you can't rememeber what color stands for what direction~~!}}<br />		'''In addition you can check the gyro direction by turning the helicopter by hand around its vertical axis.''' When turning the heli the gyro must move the servo so that the rotor will produce a counter action agains the turn direction. So later in flight the gyro will stop the helicopter from unwanted movement. Here the LED will light up in '''blue''' color when you turn the helicopter to the '''right''' and light up in '''red''' when you turn it to the '''left'''. So you can get a little reminder when you do not know which is the correct stick direction to setup, when you need to do the setup later on the field!}}<br />
	<br />		<br />

FuzzyBot: Importing a new version from external source

2017-11-30T14:49:53Z

Importing a new version from external source

← Older revision		Revision as of 14:49, 30 November 2017
Line 65:		Line 65:
	<br />		<br />
	<br />		<br />
	1. When you move the rudder stick to full deflection, the Status LED on the MICROBEAST PLUS should light solid and the label ''right'' or ''left'' should change the color accordingly. If the stick is not moving far enough, you will see the message "Increase!" In this case '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position''' and the label will disappear in the software. (Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when ~~reaching~~ the end position.)<br />		1. When you move the rudder stick to full deflection, the Status LED on the MICROBEAST PLUS should light solid and the label ''right'' or ''left'' should change the color accordingly. If the stick is not moving far enough, you will see the message "Increase!" In this case '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position''' and the label will disappear in the software. (Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when raching the end position.)<br />
	<br />		<br />
	2. Now connect the rudder servo to [CH4] port of MICROBEAST PLUS as described above and check the rudder direction on the helicopter. '''If the stick is moving the servo into the wrong direction use the servo reverse function of your transmitter''' and reverse the rudder channel to set stick control direction correctly. Now when the servo is moving correctly set the rudder direction of the MICROBEAST PLUS gyro: When you move the rudder stick/servo to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left), reverse the display (internal control direction) by choosing either ''normal'' or ''inverted'' in the software.'''<br />		2. Now connect the rudder servo to [CH4] port of MICROBEAST PLUS as described above and check the rudder direction on the helicopter. '''If the stick is moving the servo into the wrong direction use the servo reverse function of your transmitter''' and reverse the rudder channel to set stick control direction correctly. Now when the servo is moving correctly set the rudder direction of the MICROBEAST PLUS gyro: When you move the rudder stick/servo to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left), reverse the display (internal control direction) by choosing either ''normal'' or ''inverted'' in the software.'''<br />

FuzzyBot: Importing a new version from external source

2017-11-30T14:49:51Z

Importing a new version from external source

← Older revision		Revision as of 14:49, 30 November 2017
Line 55:		Line 55:
	3. Finally adjust the servo limit by changing the values in the two adjustment boxes for each direction. To do so, carefully use the rudder stick to move the servo to the endpoint (watch out to not jam the servo) and increase/decrease the endpoint as necessary.<br />		3. Finally adjust the servo limit by changing the values in the two adjustment boxes for each direction. To do so, carefully use the rudder stick to move the servo to the endpoint (watch out to not jam the servo) and increase/decrease the endpoint as necessary.<br />
	<br />		<br />
	{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the servo.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />		{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the servo.''' Be very conscientious when doing this setup step as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />
	<br />		<br />
	'''In addition you can check the gyro direction by turning the helicopter by hand around its vertical axis.''' When turning the heli the gyro must move the servo so that the rotor will produce a counter action agains the turn direction. So later in flight the gyro will stop the helicopter from unwanted movement.}}<br />		'''In addition you can check the gyro direction by turning the helicopter by hand around its vertical axis.''' When turning the heli the gyro must move the servo so that the rotor will produce a counter action agains the turn direction. So later in flight the gyro will stop the helicopter from unwanted movement.}}<br />

FuzzyBot: Importing a new version from external source

2017-11-30T14:37:10Z

Importing a new version from external source

← Older revision		Revision as of 14:37, 30 November 2017
Line 65:		Line 65:
	<br />		<br />
	<br />		<br />
	1. When you move the rudder stick to full deflection, the Status LED on the MICROBEAST PLUS should light solid and the label ''right'' or ''left'' should change the color accordingly. If the stick is not moving far enough, you will see the message "Increase!" In this case '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position''' and the label will disappear in the software. (Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when ~~raching~~ the end position.)<br />		1. When you move the rudder stick to full deflection, the Status LED on the MICROBEAST PLUS should light solid and the label ''right'' or ''left'' should change the color accordingly. If the stick is not moving far enough, you will see the message "Increase!" In this case '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position''' and the label will disappear in the software. (Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)<br />
	<br />		<br />
	2. Now connect the rudder servo to [CH4] port of MICROBEAST PLUS as described above and check the rudder direction on the helicopter. '''If the stick is moving the servo into the wrong direction use the servo reverse function of your transmitter''' and reverse the rudder channel to set stick control direction correctly. Now when the servo is moving correctly set the rudder direction of the MICROBEAST PLUS gyro: When you move the rudder stick/servo to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left), reverse the display (internal control direction) by choosing either ''normal'' or ''inverted'' in the software.'''<br />		2. Now connect the rudder servo to [CH4] port of MICROBEAST PLUS as described above and check the rudder direction on the helicopter. '''If the stick is moving the servo into the wrong direction use the servo reverse function of your transmitter''' and reverse the rudder channel to set stick control direction correctly. Now when the servo is moving correctly set the rudder direction of the MICROBEAST PLUS gyro: When you move the rudder stick/servo to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left), reverse the display (internal control direction) by choosing either ''normal'' or ''inverted'' in the software.'''<br />

FuzzyBot: Importing a new version from external source

2017-11-30T14:36:05Z

Importing a new version from external source

← Older revision		Revision as of 14:36, 30 November 2017
Line 36:		Line 36:
	2. Now set the rudder direction of the MICROBEAST PLUS gyro: When you move the rudder stick to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left) reverse the display (internal control direction) by tapping the aileron(!) stick once.'''<br />		2. Now set the rudder direction of the MICROBEAST PLUS gyro: When you move the rudder stick to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left) reverse the display (internal control direction) by tapping the aileron(!) stick once.'''<br />
	<br />		<br />
	3. Optional: When you move the rudder stick to full deflection, the Status LED should light solid, not just flash. If this is not the case, '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position'''. (Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when ~~raching~~ the end position.)<br />		3. Optional: When you move the rudder stick to full deflection, the Status LED should light solid, not just flash. If this is not the case, '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position'''. (Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)<br />
	<br />		<br />
	{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the servo.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />		{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the servo.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />
	<br />		<br />
	'''In addition you can check the gyro direction by turning the helicopter by hand around its vertical axis.''' When turning the heli the gyro must move the servo so that the rotor will produce a counter action agains the turn direction. So later in flight the gyro will stop the helicopter from unwanted movement. Here the LED will light up in '''blue''' color when you turn the helicopter to the '''right''' and light up in '''red''' when you turn it to the '''left'''. So you ~~can get~~ a little reminder ~~when you do not know which is the correct stick direction to setup,~~ when you need to do the setup later on the field!}}<br />		'''In addition you can check the gyro direction by turning the helicopter by hand around its vertical axis.''' When turning the heli the gyro must move the servo so that the rotor will produce a counter action agains the turn direction. So later in flight the gyro will stop the helicopter from unwanted movement. Here the LED will light up in '''blue''' color when you turn the helicopter to the '''right''' and light up in '''red''' when you turn it to the '''left'''. This is to give you a little reminder when you need to do the setup later on the field and you can't rememeber what color stands for what direction!}}<br />
	<br />		<br />

FuzzyBot: Updating to match new version of source page

2017-11-30T10:38:57Z

Updating to match new version of source page

← Older revision		Revision as of 10:38, 30 November 2017
Line 1:		Line 1:
			{{DISPLAYTITLE:SETUP MENU E & F - Rudder limits and control direction\|noerror}}
	{{TOC_MBPlusV5}}		{{TOC_MBPlusV5}}
	__TOC__		__TOC__