Manuals:MBPlusFblV5:Setupmenu I - Revision history

Shornstein at 09:36, 19 July 2018

2018-07-19T09:36:24Z

← Older revision		Revision as of 09:36, 19 July 2018
Line 7:		Line 7:

	<!--T:7-->		<!--T:7-->
	At SETUP MENU point I move the collective pitch on the transmitter and ~~change~~ the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />		At SETUP MENU point I move the collective pitch on the transmitter and adjust the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />
	<br />		<br />
	{{QUOTE\|'''Please note:''' Usually you can not reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total. There is one exception: with mechanical mixing (mCCPM) each servo is controling one function, so actually here you can reverse the servos ~~also~~ be reversing the sticks/functions in the transmitter. Because of this, the servo reversing in MICROBEAST PLUS is not necessary and not provided when using the mCCPM swash type! SETUP MENU point I will be skipped in this case.}}<br />		{{QUOTE\|'''Please note:''' Usually you can not reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total. There is one exception: with mechanical mixing (mCCPM) each servo is controling one function, so actually here you can reverse the servos be reversing the sticks/functions in the transmitter, too. Because of this, the servo reversing in MICROBEAST PLUS is not necessary and not provided when using the mCCPM swash type! SETUP MENU point I will be skipped in this case.}}<br />
	<br />		<br />
	<br />		<br />

	=Adjustment on the device= <!--T:8-->		=Adjustment on the device= <!--T:8-->
	By tapping the aileron stick you can select one servo after another. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. Tap the rudder stick once to ~~change~~ the servo direction. You can switch back and forth between the servos as often as you need.<br />		By tapping the '''aileron''' stick you can '''select one servo after another'''. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. Tap the '''rudder''' stick once to '''reverse the servo direction'''. You can switch back and forth between the servos as often as you need.<br />
	<br />		<br />
	{\|cellpadding="4" cellspacing="0" border="1"		{\|cellpadding="4" cellspacing="0" border="1"
Line 23:		Line 23:
	\|style="color:white; background-color:#FF3300" \| red \|\|CH2 – aileron(1) servo		\|style="color:white; background-color:#FF3300" \| red \|\|CH2 – aileron(1) servo
	\|-		\|-
	\| style="color:white; background-color:#0066FF" \| blue \|\| CH3 – aileron(2)		\| style="color:white; background-color:#0066FF" \| blue \|\| CH3 – aileron(2) <!-- no pitch servo as this step is not provided for mCCPM! -->
	\|-		\|-
	\| style="color:white; background: linear-gradient(to right, #FF3300, black, #0066FF)" \| red/blue \|\| CH7 – elevator servo(2) (90° eCCPM only)		\| style="color:white; background: linear-gradient(to right, #FF3300, black, #0066FF)" \| red/blue \|\| CH7 – elevator servo(2) (90° eCCPM only)
	\|}<br />		\|}<br />
	~~<br />~~
	~~<br />~~

	~~=Setup with StudioX= <!--T:4-->~~
	To activate the servo directions adjustments click the '''Adjust button''' in the corresponding table row (when using the '''Wizard''' function this will be done automatically when you click the '''Next button''' after adjusting Menu Point H). For your reference the servos will briefly move up and down once one after another in the given order CH1 to CH3 (CH7) so you can identify them easily. Set servo direction for each servo as necessary and make sure the pitch is moving correctly as described above. Finally click the '''Save button''' or '''Next button''' (when using the '''Wizard''' function) to finish the adjustment.<br />
	~~<br />~~
	~~[[File:SetupI.PNG\|x250px]]<br />~~
	<br />		<br />
	<br />		<br />

Shornstein at 07:57, 12 January 2018

2018-01-12T07:57:12Z

← Older revision		Revision as of 07:57, 12 January 2018
Line 2:		Line 2:
	<!--T:6-->		<!--T:6-->
	{{DISPLAYTITLE:SETUP MENU I - Servo directions\|noerror}}		{{DISPLAYTITLE:SETUP MENU I - Servo directions\|noerror}}
	{{TOC_MBPlusV5\|Manuals:MBPlusFblV5:Setupmenu_H/en\|Manuals:MBPlusFblV5:Setupmenu_J/en}}		{{TOC_MBPlusV5\|Manuals:MBPlusFblV5:Setupmenu_H/en\|Manuals:MBPlusFblV5:Setupmenu_J/en\|SETUPMENU}}
	__TOC__		__TOC__
	<br />		<br />

Shornstein at 07:00, 12 January 2018

2018-01-12T07:00:26Z

← Older revision		Revision as of 07:00, 12 January 2018
Line 2:		Line 2:
	<!--T:6-->		<!--T:6-->
	{{DISPLAYTITLE:SETUP MENU I - Servo directions\|noerror}}		{{DISPLAYTITLE:SETUP MENU I - Servo directions\|noerror}}
	{{TOC_MBPlusV5}}		{{TOC_MBPlusV5\|Manuals:MBPlusFblV5:Setupmenu_H/en\|Manuals:MBPlusFblV5:Setupmenu_J/en}}
	__TOC__		__TOC__
	<br />		<br />

Shornstein at 13:50, 2 January 2018

2018-01-02T13:50:20Z

← Older revision		Revision as of 13:50, 2 January 2018
Line 9:		Line 9:
	At SETUP MENU point I move the collective pitch on the transmitter and change the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />		At SETUP MENU point I move the collective pitch on the transmitter and change the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />
	<br />		<br />
	{{QUOTE\|'''Please note:''' ~~You~~ can not reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total.}}<br />		{{QUOTE\|'''Please note:''' Usually you can not reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total. There is one exception: with mechanical mixing (mCCPM) each servo is controling one function, so actually here you can reverse the servos also be reversing the sticks/functions in the transmitter. Because of this, the servo reversing in MICROBEAST PLUS is not necessary and not provided when using the mCCPM swash type! SETUP MENU point I will be skipped in this case.}}<br />
	<br />		<br />
	<br />		<br />
Line 17:		Line 17:
	<br />		<br />
	{\|cellpadding="4" cellspacing="0" border="1"		{\|cellpadding="4" cellspacing="0" border="1"
	\| style="width:100px; text-align:left;" \| '''Status-LED''' \|\| style="text-align:center;" \| '''Servo ~~trim~~'''		\| style="width:100px; text-align:left;" \| '''Status-LED''' \|\| style="text-align:center;" \| '''Servo reverse'''
	\|-
	~~\|style="color:white; background-color:black" \| off \|\| all zero~~
	\|-		\|-
	\| style="color:white; background-color:#CC66CC" \| purple \|\| CH1 – elevator servo		\| style="color:white; background-color:#CC66CC" \| purple \|\| CH1 – elevator servo
Line 25:		Line 23:
	\|style="color:white; background-color:#FF3300" \| red \|\|CH2 – aileron(1) servo		\|style="color:white; background-color:#FF3300" \| red \|\|CH2 – aileron(1) servo
	\|-		\|-
	\| style="color:white; background-color:#0066FF" \| blue \|\| CH3 – aileron(2~~) / pitch servo (mCCPM~~)		\| style="color:white; background-color:#0066FF" \| blue \|\| CH3 – aileron(2)
	\|-		\|-
	\| style="color:white; background: linear-gradient(to right, #FF3300, black, #0066FF)" \| red/blue \|\| CH7 – elevator servo(2) (90° eCCPM only)		\| style="color:white; background: linear-gradient(to right, #FF3300, black, #0066FF)" \| red/blue \|\| CH7 – elevator servo(2) (90° eCCPM only)

Shornstein: Marked this version for translation

2017-11-30T12:45:44Z

Marked this version for translation

← Older revision		Revision as of 12:45, 30 November 2017
Line 1:		Line 1:
	<translate>		<translate>
			<!--T:6-->
	{{DISPLAYTITLE:SETUP MENU I - Servo directions\|noerror}}		{{DISPLAYTITLE:SETUP MENU I - Servo directions\|noerror}}
	{{TOC_MBPlusV5}}		{{TOC_MBPlusV5}}
Line 5:		Line 6:
	<br />		<br />

			<!--T:7-->
	At SETUP MENU point I move the collective pitch on the transmitter and change the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />		At SETUP MENU point I move the collective pitch on the transmitter and change the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />
	<br />		<br />
Line 11:		Line 13:
	<br />		<br />

	=Adjustment on the device=		=Adjustment on the device= <!--T:8-->
	By tapping the aileron stick you can select one servo after another. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. Tap the rudder stick once to change the servo direction. You can switch back and forth between the servos as often as you need.<br />		By tapping the aileron stick you can select one servo after another. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. Tap the rudder stick once to change the servo direction. You can switch back and forth between the servos as often as you need.<br />
	<br />		<br />

Shornstein at 12:45, 30 November 2017

2017-11-30T12:45:25Z

← Older revision		Revision as of 12:45, 30 November 2017
Line 7:		Line 7:
	At SETUP MENU point I move the collective pitch on the transmitter and change the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />		At SETUP MENU point I move the collective pitch on the transmitter and change the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />
	<br />		<br />
	{QUOTE\|'''Please note:''' You can not reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total.}}<br />		{{QUOTE\|'''Please note:''' You can not reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total.}}<br />
	<br />		<br />
	<br />		<br />

Shornstein: Created page with " {{DISPLAYTITLE:SETUP MENU I - Servo directions|noerror}} {{TOC_MBPlusV5}} TOC
At SETUP MENU point I move the collective pitch on the transmitter and ch..."

2017-11-30T12:45:05Z

Created page with "<translate> {{DISPLAYTITLE:SETUP MENU I - Servo directions|noerror}} {{TOC_MBPlusV5}} __TOC__ At SETUP MENU point I move the collective pitch on the transmitter and ch..."

New page

<translate>
{{DISPLAYTITLE:SETUP MENU I - Servo directions|noerror}}
{{TOC_MBPlusV5}}
__TOC__
 

At SETUP MENU point I move the collective pitch on the transmitter and change the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later. 
 
{QUOTE|'''Please note:''' You can not reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total.}} 
 
 

=Adjustment on the device=
By tapping the aileron stick you can select one servo after another. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. Tap the rudder stick once to change the servo direction. You can switch back and forth between the servos as often as you need. 
 
{|cellpadding="4" cellspacing="0" border="1"
| style="width:100px; text-align:left;" | '''Status-LED''' || style="text-align:center;" | '''Servo trim'''
|-
|style="color:white; background-color:black" | off || all zero
|-
| style="color:white; background-color:#CC66CC" | purple || CH1 – elevator servo
|-
|style="color:white; background-color:#FF3300" | red ||CH2 – aileron(1) servo
|-
| style="color:white; background-color:#0066FF" | blue || CH3 – aileron(2) / pitch servo (mCCPM)
|-
| style="color:white; background: linear-gradient(to right, #FF3300, black, #0066FF)" | red/blue || CH7 – elevator servo(2) (90° eCCPM only)
|} 
 
 

=Setup with StudioX= 
To activate the servo directions adjustments click the '''Adjust button''' in the corresponding table row (when using the '''Wizard''' function this will be done automatically when you click the '''Next button''' after adjusting Menu Point H). For your reference the servos will briefly move up and down once one after another in the given order CH1 to CH3 (CH7) so you can identify them easily. Set servo direction for each servo as necessary and make sure the pitch is moving correctly as described above. Finally click the '''Save button''' or '''Next button''' (when using the '''Wizard''' function) to finish the adjustment. 
 
[[File:SetupI.PNG|x250px]] 
 
 

=Setup with StudioXm= 
When the adjustment screen appears, for your reference the servos will briefly move up and down once one after another in the given order CH1 to CH3 (CH7) so you can identify them easily. Set servo direction for each servo as necessary and make sure the pitch is moving correctly as described above. 
 
[[File:SetupIm.png|x250px]] 
 
 

</translate>