Manuals:MBPlusFblV52:Setupmenu H - Revision history

Shornstein at 15:58, 28 February 2023

2023-02-28T15:58:06Z

← Older revision		Revision as of 15:58, 28 February 2023
Line 9:		Line 9:
	At SETUP MENU point H move the collective pitch on the transmitter and adjust the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />		At SETUP MENU point H move the collective pitch on the transmitter and adjust the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />
	<br />		<br />
	{{QUOTE\|'''Please note:''' Usually you can ~~not~~ reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total. ~~There is one exception: with mechanical mixing (mCCPM) each servo is controling one function, so actually here you can reverse the servos be~~ reversing the ~~sticks/functions in the transmitter, too. Because~~ of ~~this, the servo reversing in MICROBEAST PLUS is not necessary and not provided when using the mCCPM swash type! SETUP MENU point H will be skipped in this case~~.}}<br />		{{QUOTE\|'''Please note:''' Usually you can't reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total. So reversing the function will change directions of all servos at once.}}<br />
	<br />		<br />
	<br />		<br />

Shornstein at 14:17, 22 June 2021

2021-06-22T14:17:45Z

← Older revision		Revision as of 14:17, 22 June 2021
Line 31:		Line 31:

	=Setup with StudioXm= <!--T:5-->		=Setup with StudioXm= <!--T:5-->
	When the adjustment screen appears, ~~set servo direction for each servo as necessary and~~ make sure the pitch is moving correctly as described above.<br />		When the adjustment screen appears, make sure the pitch is moving correctly as described above and set servo direction for each servo as necessary.<br />
	<br />		<br />
	[[File:~~SetupIm~~.~~png~~\|x250px]]<br />		[[File:Basic_setup_servo_trim.PNG\|x250px]]<br />
	<br />		<br />
	<br />		<br />

	</translate>		</translate>

Shornstein at 13:10, 20 October 2020

2020-10-20T13:10:16Z

← Older revision		Revision as of 13:10, 20 October 2020
Line 2:		Line 2:
	<!--T:6-->		<!--T:6-->
	{{DISPLAYTITLE:SETUP MENU H - Servo directions\|noerror}}		{{DISPLAYTITLE:SETUP MENU H - Servo directions\|noerror}}
	{{TOC_MBPlusV5\|Manuals:~~MBPlusFblV5~~:Setupmenu_G/en\|Manuals:~~MBPlusFblV5~~:Setupmenu_I/en\|SETUPMENU\|2}}		{{TOC_MBPlusV5\|Manuals:MBPlusFblV52:Setupmenu_G/en\|Manuals:MBPlusFblV52:Setupmenu_I/en\|SETUPMENU\|2}}
	__TOC__		__TOC__
	<br />		<br />

Shornstein at 13:08, 20 October 2020

2020-10-20T13:08:44Z

← Older revision		Revision as of 13:08, 20 October 2020
Line 1:		Line 1:
	<translate>		<translate>
	<!--T:6-->		<!--T:6-->
	{{DISPLAYTITLE:SETUP MENU I - Servo directions\|noerror}}		{{DISPLAYTITLE:SETUP MENU H - Servo directions\|noerror}}
	{{TOC_MBPlusV5\|Manuals:MBPlusFblV5:~~Setupmenu_H~~/en\|Manuals:MBPlusFblV5:~~Setupmenu_J~~/en\|SETUPMENU}}		{{TOC_MBPlusV5\|Manuals:MBPlusFblV5:Setupmenu_G/en\|Manuals:MBPlusFblV5:Setupmenu_I/en\|SETUPMENU\|2}}
	__TOC__		__TOC__
	<br />		<br />

	<!--T:7-->		<!--T:7-->
	At SETUP MENU point I move the collective pitch on the transmitter and adjust the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />		At SETUP MENU point H move the collective pitch on the transmitter and adjust the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />
	<br />		<br />
	{{QUOTE\|'''Please note:''' Usually you can not reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total. There is one exception: with mechanical mixing (mCCPM) each servo is controling one function, so actually here you can reverse the servos be reversing the sticks/functions in the transmitter, too. Because of this, the servo reversing in MICROBEAST PLUS is not necessary and not provided when using the mCCPM swash type! SETUP MENU point I will be skipped in this case.}}<br />		{{QUOTE\|'''Please note:''' Usually you can not reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total. There is one exception: with mechanical mixing (mCCPM) each servo is controling one function, so actually here you can reverse the servos be reversing the sticks/functions in the transmitter, too. Because of this, the servo reversing in MICROBEAST PLUS is not necessary and not provided when using the mCCPM swash type! SETUP MENU point H will be skipped in this case.}}<br />
	<br />		<br />
	<br />		<br />

	=Adjustment on the device= <!--T:8-->		=Adjustment on the device= <!--T:8-->
	By tapping the '''~~aileron~~''' stick you can '''select one servo after another'''. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. ~~Tap~~ the '''~~rudder~~''' stick once to '''reverse ~~the servo~~ direction'''~~. You can switch back and forth between the servos as often as you need~~.<br />		By tapping the '''rudder''' stick you can '''select one servo after another'''. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. (You can switch back and forth between the servos as often as you need.) When you tap the '''aileron''' stick once, the selected servo will '''reverse its direction'''.<br />
	<br />		<br />
	{\|cellpadding="4" cellspacing="0" border="1"		{\|cellpadding="4" cellspacing="0" border="1"
Line 31:		Line 31:

	=Setup with StudioXm= <!--T:5-->		=Setup with StudioXm= <!--T:5-->
	When the adjustment screen appears, ~~for your reference the servos will briefly move up and down once one after another in the given order CH1 to CH3 (CH7) so you can identify them easily. Set~~ servo direction for each servo as necessary and make sure the pitch is moving correctly as described above.<br />		When the adjustment screen appears, set servo direction for each servo as necessary and make sure the pitch is moving correctly as described above.<br />
	<br />		<br />
	[[File:SetupIm.png\|x250px]]<br />		[[File:SetupIm.png\|x250px]]<br />

Shornstein: Copied from Manuals:MBPlusFblV5:Setupmenu I, revision 15838

2018-07-19T09:36:24Z

Copied from Manuals:MBPlusFblV5:Setupmenu I, revision 15838

New page

<translate>

{{DISPLAYTITLE:SETUP MENU I - Servo directions|noerror}}
{{TOC_MBPlusV5|Manuals:MBPlusFblV5:Setupmenu_H/en|Manuals:MBPlusFblV5:Setupmenu_J/en|SETUPMENU}}
__TOC__
 


At SETUP MENU point I move the collective pitch on the transmitter and adjust the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later. 
 
{{QUOTE|'''Please note:''' Usually you can not reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total. There is one exception: with mechanical mixing (mCCPM) each servo is controling one function, so actually here you can reverse the servos be reversing the sticks/functions in the transmitter, too. Because of this, the servo reversing in MICROBEAST PLUS is not necessary and not provided when using the mCCPM swash type! SETUP MENU point I will be skipped in this case.}} 
 
 

=Adjustment on the device= 
By tapping the '''aileron''' stick you can '''select one servo after another'''. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. Tap the '''rudder''' stick once to '''reverse the servo direction'''. You can switch back and forth between the servos as often as you need. 
 
{|cellpadding="4" cellspacing="0" border="1"
| style="width:100px; text-align:left;" | '''Status-LED''' || style="text-align:center;" | '''Servo reverse'''
|-
| style="color:white; background-color:#CC66CC" | purple || CH1 – elevator servo
|-
|style="color:white; background-color:#FF3300" | red ||CH2 – aileron(1) servo
|-
| style="color:white; background-color:#0066FF" | blue || CH3 – aileron(2) 
|-
| style="color:white; background: linear-gradient(to right, #FF3300, black, #0066FF)" | red/blue || CH7 – elevator servo(2) (90° eCCPM only)
|} 
 
 

=Setup with StudioXm= 
When the adjustment screen appears, for your reference the servos will briefly move up and down once one after another in the given order CH1 to CH3 (CH7) so you can identify them easily. Set servo direction for each servo as necessary and make sure the pitch is moving correctly as described above. 
 
[[File:SetupIm.png|x250px]] 
 
 

</translate>