StudioX Plugins - Revision history

Shornstein: Marked this version for translation

2018-01-10T07:42:49Z

Marked this version for translation

← Older revision		Revision as of 07:42, 10 January 2018
Line 115:		Line 115:
	<br />		<br />

	==Changing login password==		==Changing login password== <!--T:41-->
	If not already done, login to the freakware Network with your email adress and open the ''freakware Network'' dialog again by clicking the '''fw''' button in the top left corner of StudioX:<br />		If not already done, login to the freakware Network with your email adress and open the ''freakware Network'' dialog again by clicking the '''fw''' button in the top left corner of StudioX:<br />
	<br />		<br />

Shornstein at 07:42, 10 January 2018

2018-01-10T07:42:27Z

← Older revision		Revision as of 07:42, 10 January 2018
Line 42:		Line 42:
	</table>		</table>
	When using the RX2SIM Wireless Multi-Sim Adapter make sure it is set to USB2SYS emulation mode (push button on the RX2SIM several times until the LED lights up in orange color)!<br />		When using the RX2SIM Wireless Multi-Sim Adapter make sure it is set to USB2SYS emulation mode (push button on the RX2SIM several times until the LED lights up in orange color)!<br />
			<br />
	<br />		<br />

	= The freakware Network = <!--T:40-->		= The freakware Network = <!--T:40-->
	The freakware Network is our online network which is used to keep in touch with our customers and which is used to distribute firmware updates and other online content for our hardware devices. To solely change settings and configure your device neither you need an internet connection nor do you need to login to the freakware Network or create a freakware network Account.		The freakware Network is our online network which is used to keep in touch with our customers and which is used to distribute firmware updates and other online content for our hardware devices. To solely change settings and configure your device neither you need an internet connection nor do you need to login to the freakware Network or create a freakware network Account.<br />
			<br />

	==freakware Network Account== <!--T:10-->		==freakware Network Account== <!--T:10-->
	A freakware Network user account is mandatory to use functions like online manuals and firmware updates. You can create your own account very easily ~~by opening~~ the ''freakware Network'' ~~connector~~ dialog by clicking the '''fw''' button in the top left corner of StudioX:<br />		A freakware Network user account is mandatory to use functions like online manuals and firmware updates. You can create your own account very easily: open the ''freakware Network'' dialog by clicking the '''fw''' button in the top left corner of StudioX:<br />
	<br />		<br />

Line 55:		Line 57:

	<!--T:13-->		<!--T:13-->
	From there open the ''Create New Account'' tab, ~~and~~ use your eMail address as login and ~~select~~ a secure password:<br />		From there open the ''Create New Account'' tab, use your eMail address as login and enter a secure password:<br />
	<br />		<br />

Line 68:		Line 70:

	<!--T:17-->		<!--T:17-->
	Therefore we strongly recommend to use a real address and not a one-time email provider.<br />		Therefore we strongly recommend to use a real address and not a one-time email provider!<br />
	<br />		<br />

Line 95:		Line 97:
	<!--T:24-->		<!--T:24-->
	After this the message should be gone, and the "Update Firmware" tab should offer you something.<br />		After this the message should be gone, and the "Update Firmware" tab should offer you something.<br />
			<br />
	<br />		<br />

	~~<br />~~
	==Updating Devices== <!--T:25-->		==Updating Devices== <!--T:25-->

Line 111:		Line 113:
	[[File:online_update.png\|noframes\|300px\|none]]<br />		[[File:online_update.png\|noframes\|300px\|none]]<br />
	Have a look at [[Help:FAQ:General/en#Differences_between_firmware_versions_.28changelog.29\|General questions about the product]] to see which are the latest firmwares at the moment.<br />		Have a look at [[Help:FAQ:General/en#Differences_between_firmware_versions_.28changelog.29\|General questions about the product]] to see which are the latest firmwares at the moment.<br />
			<br />

			==Changing login password==
			If not already done, login to the freakware Network with your email adress and open the ''freakware Network'' dialog again by clicking the '''fw''' button in the top left corner of StudioX:<br />
			<br />
			[[File:fwnetwork_open_connector.png\|noframes\|300px\|none]]<br />
			<br />
			Then choose "Change Password", enter your current password and a new one and click the "Change Password" button.<br />
			<br />
			[[File:ChangePasswordDialog.png\|noframes\|300px\|none]]<br />
			<br />
			'''Please note:''' In order to change the password you must be logged in. In case you've forgotten your current password and can't log in you can request a new password after entering a wrong password 3 times in the "Login" dialog (or simply click the "Login" button repeatedly). Click the appearing "Recover Password" button, then you will get an email with a new password immediately. '''Please make sure you've entered the correct email address and especially make sure this email is a valid freakware Network account!''' If this mail address is not linked to an account of course we can't send you a password.<br />
			<br />
			[[File:ForgotPW.PNG\|border\|none\|300px]]<br />
			<br />
	<br />		<br />

Shornstein at 11:11, 13 November 2017

2017-11-13T11:11:48Z

← Older revision		Revision as of 11:11, 13 November 2017
Line 105:		Line 105:
	<!--T:27-->		<!--T:27-->
	Once done the status will show "done" and you can update to this firmware.		Once done the status will show "done" and you can update to this firmware.

	~~<!--T:28-->~~
	~~All firmware available currently are tested and stable. Feel free to update!~~

	<!--T:29-->		<!--T:29-->

Shornstein at 11:05, 13 November 2017

2017-11-13T11:05:22Z

@@ Line 4: / Line 4: @@
 {{TOC_StudioX}}
 __TOC__
 <br />
@@ Line 52: / Line 25: @@
      <td style= "padding: 0px 50px;">[[File:RX2SIM_MBPlus_powered.png|400px]]</td>
    </tr>
-</table>
+</table><br />
 <br />
@@ Line 70: / Line 42: @@
 </table>
 When using the RX2SIM Wireless Multi-Sim Adapter make sure it is set to USB2SYS emulation mode (push button on the RX2SIM several times until the LED lights up in orange color)!<br />
 <br />
@@ Line 101: / Line 72: @@
   <!--T:18-->
-{{QUOTE|If you don't get the confirmation mail please check your account's SPAM folder. As this is an automatic email it is likely that some mail providers consider the mail as spam mail.}}
+[[File:ConfirmLogin.png|border|none|x200px]]<br />
 <br />
 <br />
@@ Line 143: / Line 113: @@
 <br />
 [[File:online_update.png|noframes|300px|none]]<br />
-Have a look at the product overview page to see which are the latest firmwares at the moment:
+Have a look at [[Help:FAQ:General/en#Differences_between_firmware_versions_.28changelog.29|General questions about the product]] to see which are the latest firmwares at the moment.<br />
-* [[BEASTX_Devices/en#Microbeast|MICROBEAST]]
+<br />
-* [[BEASTX_Devices/en#Microbeast_PLUS_und_Microbeast_PLUS_HD|MICROBEAST PLUS / MICROBEAST PLUS HD]]
-* [[BEASTX_Devices/en#AR7200BX_und_AR7300BX|SPEKTRUM AR7200BX / SPEKTRUM AR7300BX]]
+=StudioX options= <!--T:36-->
-* [[BEASTX_Devices/en#AR7210BX|SPEKTRUM AR7210BX]]
+You can edit some global options for the StudioX software when clicking "Edit" and choosing "Preferences..." from the menu bar.<br />
 </translate>

Shornstein: Marked this version for translation

2017-11-06T14:14:27Z

Marked this version for translation

← Older revision		Revision as of 14:14, 6 November 2017
Line 6:		Line 6:
	<br />		<br />

	=StudioX options=		=StudioX options= <!--T:36-->
	You can edit some global options for the StudioX software when clicking "Edit" and choosing "Preferences..." from the menu bar.<br />		You can edit some global options for the StudioX software when clicking "Edit" and choosing "Preferences..." from the menu bar.<br />
	<br />		<br />

	==Check for Updates automatically==		==Check for Updates automatically== <!--T:37-->
	If your PC is connected to the internet this option makes sure that your StudioX installation is up-to-date. All 7 days the update dialog is shown automatically, showing whether an update is available or not.<br />		If your PC is connected to the internet this option makes sure that your StudioX installation is up-to-date. All 7 days the update dialog is shown automatically, showing whether an update is available or not.<br />
	<br />		<br />
Line 20:		Line 20:
	<br />		<br />

	==Language Selection==		==Language Selection== <!--T:38-->
	If the "Auto" option is selected, StudioX will use the language detected from the system's settings.		If the "Auto" option is selected, StudioX will use the language detected from the system's settings.
	Otherwise you can force on of the following languages:		Otherwise you can force on of the following languages:
Line 33:		Line 33:
	<br />		<br />

	=Connecting a device to StudioX=		=Connecting a device to StudioX= <!--T:39-->
	StudioX can be used to work with serveral types of hardware from BEASTX and RCWARE. Connection to the devices is usually established using the USB port of your computer.<br />		StudioX can be used to work with serveral types of hardware from BEASTX and RCWARE. Connection to the devices is usually established using the USB port of your computer.<br />
	<br />		<br />
Line 73:		Line 73:
	<br />		<br />

	= The freakware Network =		= The freakware Network = <!--T:40-->
	The freakware Network is our online network which is used to keep in touch with our customers and which is used to distribute firmware updates and other online content for our hardware devices. To solely change settings and configure your device neither you need an internet connection nor do you need to login to the freakware Network or create a freakware network Account.		The freakware Network is our online network which is used to keep in touch with our customers and which is used to distribute firmware updates and other online content for our hardware devices. To solely change settings and configure your device neither you need an internet connection nor do you need to login to the freakware Network or create a freakware network Account.

Line 107:		Line 107:
	<br />		<br />

	==Registering Devices==<!--T:19-->		==Registering Devices== <!--T:19-->
	''freakware Network Common Data'' like .pdf manuals and other general information is available when you're logged in.		''freakware Network Common Data'' like .pdf manuals and other general information is available when you're logged in.

Shornstein at 14:10, 6 November 2017

2017-11-06T14:10:01Z

← Older revision		Revision as of 14:10, 6 November 2017
Line 56:		Line 56:
	<br />		<br />

	= Connecting the RX2SIM Wireless Multi-Sim Adapter = <!--T:33-->		== Connecting the RX2SIM Wireless Multi-Sim Adapter == <!--T:33-->
	When RX2SIM is used as USB2SYS interface emulator to connect your BEASTX device (MICROBEAST / SPEKTRUM AR7xxxBX) as mentioned above, StudioX will not recognize the RX2SIM itself. To control it with StudioX as Stand-Alone device, i.e. for updating the firmware of the RX2SIM you must push and hold the button on the RX2SIM before and while connecting it to the computer. Then it will start in bootloader mode and StudioX will open the RX2SIM Plugin. You can see that bootloader mode is active when both blue LEDs AUX and PPM light up solid.<br />		When RX2SIM is used as USB2SYS interface emulator to connect your BEASTX device (MICROBEAST / SPEKTRUM AR7xxxBX) as mentioned above, StudioX will not recognize the RX2SIM itself. To control it with StudioX as Stand-Alone device, i.e. for updating the firmware of the RX2SIM you must push and hold the button on the RX2SIM before and while connecting it to the computer. Then it will start in bootloader mode and StudioX will open the RX2SIM Plugin. You can see that bootloader mode is active when both blue LEDs AUX and PPM light up solid.<br />
	<br />		<br />

	= Connecting the BLE2SYS bluetooth LE adapter = <!--T:34-->		== Connecting the BLE2SYS bluetooth LE adapter == <!--T:34-->
	To configure and update your BLE2SYS bluetooth LE adapter with StudioX connect it with the USB2SYS interface or RX2SIM wireless simulator interface to the computer. Using the USB2SYS you must power the device with an external power supply connected to a Y-harness. Watch out for correct polarity!<br />		To configure and update your BLE2SYS bluetooth LE adapter with StudioX connect it with the USB2SYS interface or RX2SIM wireless simulator interface to the computer. Using the USB2SYS you must power the device with an external power supply connected to a Y-harness. Watch out for correct polarity!<br />
	<br />		<br />
Line 74:		Line 74:

	= The freakware Network =		= The freakware Network =
			The freakware Network is our online network which is used to keep in touch with our customers and which is used to distribute firmware updates and other online content for our hardware devices. To solely change settings and configure your device neither you need an internet connection nor do you need to login to the freakware Network or create a freakware network Account.

	==freakware Network Account== <!--T:10-->		==freakware Network Account== <!--T:10-->
	A freakware Network user account is mandatory to use functions like online manuals and firmware updates. You can create your own account very easily by opening the ''freakware Network'' connector dialog by clicking the '''fw''' button:<br />		A freakware Network user account is mandatory to use functions like online manuals and firmware updates. You can create your own account very easily by opening the ''freakware Network'' connector dialog by clicking the '''fw''' button in the top left corner of StudioX:<br />
	<br />		<br />

Shornstein at 14:03, 6 November 2017

2017-11-06T14:03:24Z

← Older revision		Revision as of 14:03, 6 November 2017
Line 7:		Line 7:

	=StudioX options=		=StudioX options=
	You can edit some global options for the StudioX software when clicking "Edit" and choosing "Preferences..." from the menu bar.		You can edit some global options for the StudioX software when clicking "Edit" and choosing "Preferences..." from the menu bar.<br />
			<br />

	==Check for Updates automatically==		==Check for Updates automatically==
Line 16:		Line 17:
	From the "Update StudioX" dialog, you can press the "Download" button if an update is available.<br />		From the "Update StudioX" dialog, you can press the "Download" button if an update is available.<br />
	Execute the downloaded package and follow the instructions given.<br />		Execute the downloaded package and follow the instructions given.<br />
	Make sure you closed the application before trying to install a newer version.		Make sure you closed the application before trying to install a newer version.<br />
			<br />

	==Language Selection==		==Language Selection==
Line 32:		Line 34:

	=Connecting a device to StudioX=		=Connecting a device to StudioX=
	StudioX can be used to work with serveral types of hardware from BEASTX and RCWARE. Connection to the devices is usually established using the USB port of your computer.		StudioX can be used to work with serveral types of hardware from BEASTX and RCWARE. Connection to the devices is usually established using the USB port of your computer.<br />
			<br />

	== Connecting a BEASTX gyro to the computer == <!--T:1-->		== Connecting a BEASTX gyro to the computer == <!--T:1-->

Shornstein at 14:02, 6 November 2017

2017-11-06T14:02:43Z

← Older revision		Revision as of 14:02, 6 November 2017
Line 6:		Line 6:
	<br />		<br />

	=~~General~~= ~~<!--T:1-->~~		=StudioX options=
	~~Due to a plugin-based architecture~~ StudioX ~~is compatible with many different devices:~~		You can edit some global options for the StudioX software when clicking "Edit" and choosing "Preferences..." from the menu bar.
	* [[StudioX_Microbeast_Plugin/en\|MICROBEAST]]
	* [[Studiox_microbeast_plus_plugin/en\|MICROBEAST PLUS / MICROBEAST PLUS HD]]		==Check for Updates automatically==
	* [[Studiox_ar7200bx_plugin/~~en\|SPEKTRUM AR7200BX / SPEKTRUM AR7300BX]]~~		If your PC is connected to the internet this option makes sure that your StudioX installation is up-to-date. All 7 days the update dialog is shown automatically, showing whether an update is available or not.<br />
	* [[Studiox_ar7210bx_plugin/en\|SPEKTRUM AR7210BX]]
	* [[Studiox_BLE2SYS_plugin/en\|BLE2SYS bluetooth LE adapter]]
	* [[Studiox_RX2SIM_plugin/en\|RCWare RX2SIM Wireless Multi-SIM Adapter]]
	<br />		<br />
	~~The plugins may provide~~ the following ~~functionality~~:		Updating StudioX is simple and straight forward.<br />
	* ~~administration~~		[[File:studiox_update.png\|200px\|noframe\|none]]<br />
	* ~~configuration~~		From the "Update StudioX" dialog, you can press the "Download" button if an update is available.<br />
	* ~~updating and buying software upgrades~~		Execute the downloaded package and follow the instructions given.<br />
	* ~~backup and restore your settings~~		Make sure you closed the application before trying to install a newer version.
	* ~~load predefined presets~~<br />
			==Language Selection==
			If the "Auto" option is selected, StudioX will use the language detected from the system's settings.
			Otherwise you can force on of the following languages:
			* English
			* German (coming soon)
			* French (coming soon)
			* Spanish (coming soon)
			* Chinese (coming soon)

			<!--T:11-->
			'''Attention:''' Switching the language requires a restart of the StudioX Application.<br />
	<br />		<br />
	~~You~~ can ~~get detailed explanation about each plugin when you click the links~~ to the devices ~~above!<br />~~
	~~<br />~~		=Connecting a device to StudioX=
	== Connecting a BEASTX gyro to the computer ==		StudioX can be used to work with serveral types of hardware from BEASTX and RCWARE. Connection to the devices is usually established using the USB port of your computer.

			== Connecting a BEASTX gyro to the computer == <!--T:1-->
	All BEASTX gyros come with a serial communication port which typically is marked with the letters ''SYS''. Connect the servo wire coming from your USB interface to this port. Make sure to connect the wire in correct polarity on both sides! When using the USB2SYS interface you have to power the device with a separate power supply, i.e. receiver battery or BEC of the R/C model. It will not be powered from the USB port.<br />		All BEASTX gyros come with a serial communication port which typically is marked with the letters ''SYS''. Connect the servo wire coming from your USB interface to this port. Make sure to connect the wire in correct polarity on both sides! When using the USB2SYS interface you have to power the device with a separate power supply, i.e. receiver battery or BEC of the R/C model. It will not be powered from the USB port.<br />
	<br />		<br />
Line 43:		Line 53:
	<br />		<br />

	== Connecting the RX2SIM Wireless Multi-Sim Adapter == <!--T:33-->		= Connecting the RX2SIM Wireless Multi-Sim Adapter = <!--T:33-->
	When RX2SIM is used as USB2SYS interface emulator to connect your BEASTX device (MICROBEAST / SPEKTRUM AR7xxxBX) as mentioned above, StudioX will not recognize the RX2SIM itself. To control it with StudioX as Stand-Alone device, i.e. for updating the firmware of the RX2SIM you must push and hold the button on the RX2SIM before and while connecting it to the computer. Then it will start in bootloader mode and StudioX will open the RX2SIM Plugin. You can see that bootloader mode is active when both blue LEDs AUX and PPM light up solid.<br />		When RX2SIM is used as USB2SYS interface emulator to connect your BEASTX device (MICROBEAST / SPEKTRUM AR7xxxBX) as mentioned above, StudioX will not recognize the RX2SIM itself. To control it with StudioX as Stand-Alone device, i.e. for updating the firmware of the RX2SIM you must push and hold the button on the RX2SIM before and while connecting it to the computer. Then it will start in bootloader mode and StudioX will open the RX2SIM Plugin. You can see that bootloader mode is active when both blue LEDs AUX and PPM light up solid.<br />
	<br />		<br />

	== Connecting the BLE2SYS bluetooth LE adapter == <!--T:34-->		= Connecting the BLE2SYS bluetooth LE adapter = <!--T:34-->
	To configure and update your BLE2SYS bluetooth LE adapter with StudioX connect it with the USB2SYS interface or RX2SIM wireless simulator interface to the computer. Using the USB2SYS you must power the device with an external power supply connected to a Y-harness. Watch out for correct polarity!<br />		To configure and update your BLE2SYS bluetooth LE adapter with StudioX connect it with the USB2SYS interface or RX2SIM wireless simulator interface to the computer. Using the USB2SYS you must power the device with an external power supply connected to a Y-harness. Watch out for correct polarity!<br />
	<br />		<br />
Line 60:		Line 70:
	<br />		<br />

	= freakware Network Account = <!--T:10-->		= The freakware Network =

			==freakware Network Account== <!--T:10-->
	A freakware Network user account is mandatory to use functions like online manuals and firmware updates. You can create your own account very easily by opening the ''freakware Network'' connector dialog by clicking the '''fw''' button:<br />		A freakware Network user account is mandatory to use functions like online manuals and firmware updates. You can create your own account very easily by opening the ''freakware Network'' connector dialog by clicking the '''fw''' button:<br />
	<br />		<br />
Line 91:		Line 103:
	<br />		<br />

	= Registering Devices = <!--T:19-->		==Registering Devices==<!--T:19-->
	~~The access to~~ ''freakware Network Common Data'', like manuals, is available ~~for everyone who is~~ logged in.		''freakware Network Common Data'' like .pdf manuals and other general information is available when you're logged in.

	<!--T:20-->		<!--T:20-->
	To access ''Custom Data'' like firmware update you need to register your device, what means you permanently link the device to your user account.		To access ''Custom Data'' like firmware update you need to register your device what means that you permanently link the device to your user account.

	<!--T:21-->		<!--T:21-->
	If you connect your device, you should see something like this (as an example we will use a Microbeast Plus here):<br />		If you connect your device you should see something like this (as an example we will use a Microbeast Plus here):<br />
	<br />		<br />

Line 112:		Line 124:

	<br />		<br />
	= Updating Devices = <!--T:25-->		==Updating Devices== <!--T:25-->

	<!--T:26-->		<!--T:26-->

Shornstein: Marked this version for translation

2017-11-06T13:36:43Z

Marked this version for translation

← Older revision		Revision as of 13:36, 6 November 2017
Line 1:		Line 1:
	<translate>		<translate>
			<!--T:35-->
	{{DISPLAYTITLE:Basic functionality\|noerror}}		{{DISPLAYTITLE:Basic functionality\|noerror}}
	{{TOC_StudioX}}		{{TOC_StudioX}}

Shornstein at 13:36, 6 November 2017

2017-11-06T13:36:24Z

← Older revision		Revision as of 13:36, 6 November 2017
Line 1:		Line 1:
	<translate>		<translate>
	{{DISPLAYTITLE:Basic functionality\|noerror}}		{{DISPLAYTITLE:Basic functionality\|noerror}}
			{{TOC_StudioX}}
	__TOC__		__TOC__
	<br />		<br />

	=General= <!--T:1-->		=General= <!--T:1-->
	Due to a plugin-based architecture StudioX is compatible with many different devices:		Due to a plugin-based architecture StudioX is compatible with many different devices: