FuzzyBot: Importing a new version from external source

2026-09-02T14:09:15Z

Importing a new version from external source

New page

=Adjustment at the device=
The control style is set at PARAMETER MENU point B (to enter this menu point, briefly push and hold the button from operation mode so Menu LED A flashes, then briefly push the button again so Menu LED B flashes). The choice is made by moving the rudder stick in one direction until the LED indicates the desired color and state. To find your individual preference, step through the options one by one. 
 
{{TABLEV5|Control style
|normal
|sport
|pro
|extreme
|transmitter
}} 
If you are not satisfied with the presets, you may adjust the control behavior using your remote control. To do so, set the control behavior to "transmitter" (Status-LED "blue"). The maximum rotation rates for aileron, elevator and rudder can then be adjusted by increasing or decreasing the servo travel for the corresponding function in your transmitter, or by using the "Dual rate" function. In this mode, 100% stick throw (servo throw) in the transmitter corresponds to a rotation rate of approx. 400°/s on the cyclics and 600°/s on rudder. (So, for example, if you set the rudder output to 50% in the transmitter, the heli will rotate at 300°/s with full rudder stick deflection.) 
To adjust the sensitivity around mid-stick position, you can use the "Expo" function of your transmitter. Please refer to the manual of your transmitter. 
 
'''Notes:'''
* When you've changed the preset control style using the StudioX Flow app, the Status-LED will be '''off'''. You can change back to a preset by tapping the rudder stick as described, but this will remove your custom setting! 
* When using the Bank Switching feature (PROEDITION firmware only), you can only adjust the settings for flight mode/bank 1 using the LED menu on the device. The settings for banks 2 and 3 must be changed in StudioX Flow. When bank switching is deactivated, you will still see the settings of bank 1 here, as bank 1 is the default bank used when bank switching is disabled!

Translations:Manuals:BXFbl:ControlStyle/3/en - Revision history

FuzzyBot: Importing a new version from external source