FuzzyBot: Importing a new version from external source

2026-09-02T14:09:15Z

Importing a new version from external source

New page

=Setup with StudioX Flow=
Once StudioX Flow has connected to your BEASTX System, click the '''Parameter''' button on the device overview main screen. Then, in the parameter settings, click the "Next" button (->) to switch to the ''Bank 1 - Control style'' page. Here you can select a preset. In the advanced view (click the gear symbol below) you will see the currently used maximum rotation rates and expo values for each control function - aileron, elevator and rudder. The rate is measured in degrees per second; a value of 360, for example, means your helicopter will make one full turn/rotation in one second when you move the stick to full deflection. The expo value is specified in percent. 0% expo means the stick input influences the output linearly. Usually this makes the control feel very sensitive and over-reactive. By adding some expo you can soften the input around the stick center position. 
 
{|
|-
| style="padding-right:50px;"|[[File:Parameter_style_preset.PNG|x250px]]
|[[File:Parameter_style_advanced.PNG|x250px]]
|} 
 
When using the Bank Switching feature, you can set different control styles for each bank. Click "Next" until you reach ''Bank 2 - Control style'' or ''Bank 3 - Control style'' and adjust as necessary, or set the values the same as Bank 1 if you don't want different styles on each bank. 
 
{{QUOTE|Please note that your custom values for Bank 1 will be changed/overwritten when you select a preset control style in the PARAMETER MENU on the device (see above)!}}

Translations:Manuals:BXFbl:ControlStyle/5/en - Revision history

FuzzyBot: Importing a new version from external source