FuzzyBot: Importing a new version from external source

2018-07-19T10:09:24Z

Importing a new version from external source

← Older revision		Revision as of 10:09, 19 July 2018
Line 1:		Line 1:
	= Adjustment on the device =		= Adjustment on the device =
	1. Move the thrust stick up and down and check whether the pitch is changing direction correctly. If not already done at SETUP MENU point I, '''use the reverse function for the pitch channel in the transmitter to reverse direction of pitch movement in case it is wrong'''.<br />		1. Move the '''thrust''' stick up and down and check whether the '''pitch is changing direction correctly'''. If not already done at SETUP MENU point I, '''use the reverse function for the pitch channel in the transmitter to reverse direction of pitch movement in case it is wrong'''.<br />
	<br />		<br />
	2. Afterwards check the Status LED color: on <span style="color: #4169E1;">'''positive pitch'''</span> it must be <span style="color: #4169E1;">'''blue'''</span>, on <span style="color: #DC143C;">'''negative pitch'''</span> it must light in <span style="color: #DC143C;">'''red'''</span> color. '''In case the display is inverted (red = positive and blue = negative), tap the aileron stick once to reverse the internal pitch direction of MICROBEAST PLUS.'''<br />		2. Afterwards check the Status LED color: on <span style="color: #4169E1;">'''positive pitch'''</span> it must be <span style="color: #4169E1;">'''blue'''</span>, on <span style="color: #DC143C;">'''negative pitch'''</span> it must light in <span style="color: #DC143C;">'''red'''</span> color. '''In case the display is inverted (red = positive and blue = negative), tap the aileron stick once to reverse the internal pitch direction of MICROBEAST PLUS.'''<br />
	<br />		<br />
	3. When you move thrust stick to full deflection the Status LED should light solid, not just flash. If this is not the case '''increase the servo throw/endpoint of the thrust channel in the transmitter for each direction just as far so that the Status LED changes from flashing to solid when the stick reaches the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)<br />		3. When you move '''thrust stick to full deflection''' the Status LED should light '''solid''', not just flash. If this is not the case '''increase the servo throw/endpoint of the thrust channel in the transmitter for each direction just as far so that the Status LED changes from flashing to solid when the stick reaches the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)<br />
	<br />		<br />
	4. Finally adjust the maximum collective pitch when the thrust stick is at full deflection. '''Increase or decrease the maximum amount of collective pitch with the rudder stick (left = decrease, right = increase)~~'''~~. Then move the thrust to full negative and again adjust the pitch using the rudder.<br />		4. Finally adjust the maximum collective pitch when the thrust stick is at full deflection. '''Increase or decrease the maximum amount of collective pitch''' with the '''rudder''' stick (left = decrease, right = increase). Then move the thrust to full negative and again adjust the pitch using the rudder.<br />
	<br />		<br />
	{{QUOTE\|Always set the servo direction in the transmitter first, then check the display on the MICROBEAST PLUS and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the system in which direction is up and down.''' Be very conscientious when doing this setup step as wrong direction will cause loss of control during rescue bailout and poor performance in general!}}<br />		{{QUOTE\|Always set the servo direction in the transmitter first, then check the display on the MICROBEAST PLUS and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the system in which direction is up and down.''' Be very conscientious when doing this setup step as wrong direction will cause loss of control during rescue bailout and poor performance in general!}}<br />
	<br />		<br />
	<br />		<br />

FuzzyBot: Importing a new version from external source

2017-12-01T09:31:07Z

Importing a new version from external source

New page

= Adjustment on the device =
1. Move the thrust stick up and down and check whether the pitch is changing direction correctly. If not already done at SETUP MENU point I, '''use the reverse function for the pitch channel in the transmitter to reverse direction of pitch movement in case it is wrong'''. 
 
2. Afterwards check the Status LED color: on '''positive pitch''' it must be '''blue''', on '''negative pitch''' it must light in '''red''' color. '''In case the display is inverted (red = positive and blue = negative), tap the aileron stick once to reverse the internal pitch direction of MICROBEAST PLUS.''' 
 
3. When you move thrust stick to full deflection the Status LED should light solid, not just flash. If this is not the case '''increase the servo throw/endpoint of the thrust channel in the transmitter for each direction just as far so that the Status LED changes from flashing to solid when the stick reaches the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.) 
 
4. Finally adjust the maximum collective pitch when the thrust stick is at full deflection. '''Increase or decrease the maximum amount of collective pitch with the rudder stick (left = decrease, right = increase)'''. Then move the thrust to full negative and again adjust the pitch using the rudder. 
 
{{QUOTE|Always set the servo direction in the transmitter first, then check the display on the MICROBEAST PLUS and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the system in which direction is up and down.''' Be very conscientious when doing this setup step as wrong direction will cause loss of control during rescue bailout and poor performance in general!}}

Translations:Manuals:MBPlusFblV5:Setupmenu K/3/en - Revision history

FuzzyBot: Importing a new version from external source

FuzzyBot: Importing a new version from external source