Translations:Manuals:MBPlusFblV5:Setupmenu M/3/en - Revision history

FuzzyBot: Importing a new version from external source

2018-07-19T10:40:02Z

Importing a new version from external source

← Older revision		Revision as of 10:40, 19 July 2018
Line 1:		Line 1:
	= Adjustment on the device =		= Adjustment on the device =
	1. Move the stick(s) for aileron and elevator on the radio and check whether the swashplate is moved correctly on the helicopter.<br />		1. Move the stick(s) for '''aileron''' and elevator''' on the radio and check whether the swashplate is '''moved correctly''' on the helicopter.<br />
	(Note for beginners: the swashplate must follow the stick movement, so pushing elevator forward will tilt the swashplate forwards, adding aileron to the right will move the swash to the right and so on.)<br />		(Note for beginners: the swashplate must follow the stick movement, so pushing elevator forward will tilt the swashplate forwards, adding aileron to the right will move the swash to the right and so on.)<br />
	'''If the stick is moving the swashplate into the wrong direction use the reverse function of your transmitter''' and reverse the aileron and/or elevator channel in the transmitter to set stick control direction correctly.<br />		'''If the stick is moving the swashplate into the wrong direction use the reverse function of your transmitter''' and reverse the aileron and/or elevator channel in the transmitter to set stick control direction correctly.<br />
Line 6:		Line 6:
	2. Now set the internal control direction of the MICROBEAST PLUS gyro: When you push elevator <span style="color: #4169E1;">'''forwards'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you pull elevator <span style="color: #DC143C;">'''backwards'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. When you move aileron to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move aileron to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right or forwards and blue = left or backwards) reverse the display (internal control direction) by tapping the rudder stick.''' There are four possible options, only one is correct! In short: <span style="color: #4169E1;">'''aileron right + elevator forwards the Status LED must be blue'''</span>, <span style="color: #DC143C;">'''aileron left + elevator backwards the Status LED must be red.'''</span> When the LED is purple or shines in the contrary color, you've not set the correct option.<br />		2. Now set the internal control direction of the MICROBEAST PLUS gyro: When you push elevator <span style="color: #4169E1;">'''forwards'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you pull elevator <span style="color: #DC143C;">'''backwards'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. When you move aileron to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move aileron to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right or forwards and blue = left or backwards) reverse the display (internal control direction) by tapping the rudder stick.''' There are four possible options, only one is correct! In short: <span style="color: #4169E1;">'''aileron right + elevator forwards the Status LED must be blue'''</span>, <span style="color: #DC143C;">'''aileron left + elevator backwards the Status LED must be red.'''</span> When the LED is purple or shines in the contrary color, you've not set the correct option.<br />
	<br />		<br />
	3. Optional: When you move stick(s) to full deflection, the Status LED should light solid, not just flash. If this is not the case, '''increase the servo throw/endpoint of the aileron and elevator channel in the transmitter just as far so that the Status LED changes from flashing to solid when the stick(s) reach the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end positions.)<br />		3. Optional: When you move stick(s) to '''full deflection''', the Status LED should light '''solid''', not just flash. If this is not the case, '''increase the servo throw/endpoint of the aileron and elevator channel in the transmitter just as far so that the Status LED changes from flashing to solid when the stick(s) reach the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end positions.)<br />
	<br />		<br />
	{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS ~~or in the software~~ and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the swashplate.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />		{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the swashplate.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />
	<br />		<br />
	'''In addition you can check the gyro direction by turning the helicopter by hand around its horizontal and longitudinal axis.''' When turning the heli the gyro must move the swashplate so that the rotor will produce a counter action agains the turn direction. So later in flight the gyro will stop the helicopter from unwanted movement. Here the LED will always light up in '''blue''' color when you turn the helicopter to the '''right''' or '''forwards''' and light up in '''red''' when you turn it to the '''left''' or '''backwards'''. This is to give you a little reminder when you need to do the setup later on the field and you can't rememeber what color stands for what direction!}}<br />		'''In addition you can check the gyro direction by turning the helicopter by hand around its horizontal and longitudinal axis.''' When turning the heli the gyro must move the swashplate so that the rotor will produce a counter action agains the turn direction. So later in flight the gyro will stop the helicopter from unwanted movement. Here the LED will always light up in '''blue''' color when you turn the helicopter to the '''right''' or '''forwards''' and light up in '''red''' when you turn it to the '''left''' or '''backwards'''. This is to give you a little reminder when you need to do the setup later on the field and you can't rememeber what color stands for what direction!}}<br />
	<br />		<br />
	<br />		<br />

FuzzyBot: Importing a new version from external source

2018-01-10T08:31:09Z

Importing a new version from external source

← Older revision		Revision as of 08:31, 10 January 2018
Line 6:		Line 6:
	2. Now set the internal control direction of the MICROBEAST PLUS gyro: When you push elevator <span style="color: #4169E1;">'''forwards'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you pull elevator <span style="color: #DC143C;">'''backwards'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. When you move aileron to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move aileron to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right or forwards and blue = left or backwards) reverse the display (internal control direction) by tapping the rudder stick.''' There are four possible options, only one is correct! In short: <span style="color: #4169E1;">'''aileron right + elevator forwards the Status LED must be blue'''</span>, <span style="color: #DC143C;">'''aileron left + elevator backwards the Status LED must be red.'''</span> When the LED is purple or shines in the contrary color, you've not set the correct option.<br />		2. Now set the internal control direction of the MICROBEAST PLUS gyro: When you push elevator <span style="color: #4169E1;">'''forwards'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you pull elevator <span style="color: #DC143C;">'''backwards'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. When you move aileron to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move aileron to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right or forwards and blue = left or backwards) reverse the display (internal control direction) by tapping the rudder stick.''' There are four possible options, only one is correct! In short: <span style="color: #4169E1;">'''aileron right + elevator forwards the Status LED must be blue'''</span>, <span style="color: #DC143C;">'''aileron left + elevator backwards the Status LED must be red.'''</span> When the LED is purple or shines in the contrary color, you've not set the correct option.<br />
	<br />		<br />
	3. Optional: When you move stick(s) to full deflection, the Status LED should light solid, not just flash. If this is not the case, '''increase the servo throw/endpoint of the aileron and elevator channel in the transmitter just as far so that the Status LED changes from flashing to solid when the stick(s) reach the end ~~position~~'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just ~~changes~~ from flashing to solid when reaching the end ~~position~~.)<br />		3. Optional: When you move stick(s) to full deflection, the Status LED should light solid, not just flash. If this is not the case, '''increase the servo throw/endpoint of the aileron and elevator channel in the transmitter just as far so that the Status LED changes from flashing to solid when the stick(s) reach the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end positions.)<br />
	<br />		<br />
	{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the swashplate.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />		{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the swashplate.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />

Shornstein at 17:50, 9 January 2018

2018-01-09T17:50:38Z

← Older revision		Revision as of 17:50, 9 January 2018
Line 1:		Line 1:
	=~~Einstellung am Gerät~~=		= Adjustment on the device =
	1. ~~Falls noch nicht gemacht, steuere Roll und Nick und prüfe, ob die Taumelscheibe in die richtige Richtung gesteuert wird~~. ~~Sie muss genau der Steuerknüppelbewegung folgen~~: ~~Nick nach vorne kippt die Taumelscheibe nach vorn~~, ~~Roll nach rechts kippt die~~		1. Move the stick(s) for aileron and elevator on the radio and check whether the swashplate is moved correctly on the helicopter.<br />
	~~Taumelscheibe nach rechts usw.~~ .<br />		(Note for beginners: the swashplate must follow the stick movement, so pushing elevator forward will tilt the swashplate forwards, adding aileron to the right will move the swash to the right and so on.)<br />
	'''~~Falls die Taumelscheibe in die entgegengesetzte Richtung kippt, verwende die Servoumkehr im Fernsteuersender~~''' ~~und drehe die Servolaufrichtung~~/~~Steuerrichtung für den Roll- oder Nick-Steuerkanal entsprechend um~~.<br />		'''If the stick is moving the swashplate into the wrong direction use the reverse function of your transmitter''' and reverse the aileron and/or elevator channel in the transmitter to set stick control direction correctly.<br />
	<br />		<br />
	2. ~~Stelle jetzt die interne Steuerrichtung vom~~ MICROBEAST PLUS ~~ein~~: ~~Wenn Du~~ <span style="color: #4169E1;">'''~~Nick nach vorne~~'''</span> ~~bewegst~~, ~~dann muss die~~ Status LED <span style="color: #4169E1;">'''~~blau~~'''</span> ~~leuchten~~. ~~Wenn Du~~ <span style="color: #DC143C;">'''~~Nick nach hinten~~'''</span> ~~ziehst~~, ~~muss die~~ Status LED <span style="color: #DC143C;">'''~~rot~~'''</span> ~~leuchten~~. ~~Bei~~ <span style="color: #4169E1;">'''~~Roll nach rechts~~'''</span>, ~~muss die~~ Status LED <span style="color: #4169E1;">'''~~blau~~'''</span> ~~leuchten~~. <span style="color: #DC143C;">'''~~Roll nach links~~'''</span> ~~muss die~~ Status LED <span style="color: #DC143C;">'''~~rot~~'''</span> ~~leuchten lassen~~. '''~~Wenn die Anzeige falsch ist~~ (~~rot~~ = ~~rechts oder vor oder blau~~ = ~~links oder zurück~~) ~~dann kannst Du die Anzeige~~ (~~bzw~~. ~~die interne Steuerrichtung vom MICROBEAST PLUS) durch kurzes Antippen des Hecksteuerknüppels umdrehen~~''' ~~Es gibt insgesamt vier Optionen~~, ~~nur eine einzige ist richtig~~! ~~Kurz~~: <span style="color: #4169E1;">'''~~Roll rechts~~ + ~~Nick vor lässt die~~ Status LED ~~blau leuchten~~'''</span>, <span style="color: #DC143C;">'''~~Roll links~~ + ~~Nick zurück lässt die~~ Status LED ~~rot leuchten~~.'''</span> ~~Wenn die~~ LED ~~violett ist oder~~ in ~~einer anderen Farbe leuchtet~~, ~~dann ist die falsche Option ausgewählt~~.<br />		2. Now set the internal control direction of the MICROBEAST PLUS gyro: When you push elevator <span style="color: #4169E1;">'''forwards'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you pull elevator <span style="color: #DC143C;">'''backwards'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. When you move aileron to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move aileron to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right or forwards and blue = left or backwards) reverse the display (internal control direction) by tapping the rudder stick.''' There are four possible options, only one is correct! In short: <span style="color: #4169E1;">'''aileron right + elevator forwards the Status LED must be blue'''</span>, <span style="color: #DC143C;">'''aileron left + elevator backwards the Status LED must be red.'''</span> When the LED is purple or shines in the contrary color, you've not set the correct option.<br />
	<br />		<br />
	3. Optional: ~~Wenn Du den/die Steuerknüppel bis zur Maximalposition bewegst~~, ~~dann sollte die~~ Status LED ~~dauerhaft leuchten~~, ~~nicht nur blinken~~. ~~Falls das nicht der Fall ist~~, '''~~vergrößere den Steuerausschlag~~/~~Servoweg im Fernsteuersender für den jeweiligen Steuerkanal genau~~ so ~~weit, dass die~~ Status LED ~~gerade von blinkend auf dauerhaft leuchtend wechselt, wenn der Knüppel die Maximalposition erreicht~~'''. (~~Hinweis~~: ~~Stelle den Servoweg aber nicht zu groß ein~~. ~~Wenn die~~ LED ~~schon lange vor der Maximalposition leuchtet, reduziere den Ausschlag im Sender entsprechend~~.)<br />		3. Optional: When you move stick(s) to full deflection, the Status LED should light solid, not just flash. If this is not the case, '''increase the servo throw/endpoint of the aileron and elevator channel in the transmitter just as far so that the Status LED changes from flashing to solid when the stick(s) reach the end position'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just changes from flashing to solid when reaching the end position.)<br />
	<br />		<br />
	{{QUOTE\|~~Stelle immer zuerst die Steuerrichtung über den Sender ein~~, ~~prüfe dann die interne Steuerrichtung vom~~ MICROBEAST PLUS ~~und passe diese falls nötig an die tatsächliche Steuerrichtung an~~. '''~~Ändere nie die interne Steuerrichtung, um die Servolaufrichtungen zu ändern~~! ~~Die interne Steuerrichtung dient nur dazu, dem System zu zeigen,~~ in ~~welche Richtung es die Taumelscheibe steuern muss, um Drehbewegungen auszuführen~~.''' ~~Sei bei der Einstellung sehr gewissenhaft und prüfe sie mehrfach, eine falsche Einstellung führt dazu~~, ~~dass das System in die falsche Richtung steuert und der Heli wird daher mit großer Wahrscheinlichkeit unkontrollierbar sein und abstürzen~~!<br />		{{QUOTE\|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the swashplate.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter!<br />
	<br />		<br />
	'''~~Zusätzlich kann die Steuerrichtung auch geprüft werden, wenn der Heli von Hand gekippt und geneigt wird~~.''' ~~Hier muss das System bei korrekt eingestellter Steuerrichtung die Taumelscheibe immer entgegen der Bewegung steuern,~~ so ~~wie es das später im Flug machen wird, wenn der Heli eine ungewollte Drehung macht~~. ~~Beachte dass hier die Status~~ LED ~~immer~~ '''~~blau~~''' ~~leuchten wird, wenn Du den Heli nach~~ '''~~rechts~~''' ~~oder nach~~ '''~~vorne~~''' ~~kippst und~~ '''~~rot~~''' ~~leuchtet, wenn Du den Heli nach~~ '''~~links~~''' ~~oder~~ '''~~hinten~~''' ~~kippst~~. ~~Diese soll Dir eine kleine Hilfestellung geben, wenn Du später auf dem Flugfeld die Einstellung machst und Dich nicht erinnern kannst, welche Farbe für welche Steuerrichtung steht~~!}}<br />		'''In addition you can check the gyro direction by turning the helicopter by hand around its horizontal and longitudinal axis.''' When turning the heli the gyro must move the swashplate so that the rotor will produce a counter action agains the turn direction. So later in flight the gyro will stop the helicopter from unwanted movement. Here the LED will always light up in '''blue''' color when you turn the helicopter to the '''right''' or '''forwards''' and light up in '''red''' when you turn it to the '''left''' or '''backwards'''. This is to give you a little reminder when you need to do the setup later on the field and you can't rememeber what color stands for what direction!}}<br />
	<br />		<br />
	<br />		<br />

Shornstein at 17:32, 9 January 2018

2018-01-09T17:32:19Z

← Older revision		Revision as of 17:32, 9 January 2018
Line 4:		Line 4:
	'''Falls die Taumelscheibe in die entgegengesetzte Richtung kippt, verwende die Servoumkehr im Fernsteuersender''' und drehe die Servolaufrichtung/Steuerrichtung für den Roll- oder Nick-Steuerkanal entsprechend um.<br />		'''Falls die Taumelscheibe in die entgegengesetzte Richtung kippt, verwende die Servoumkehr im Fernsteuersender''' und drehe die Servolaufrichtung/Steuerrichtung für den Roll- oder Nick-Steuerkanal entsprechend um.<br />
	<br />		<br />
	2. Stelle jetzt die interne Steuerrichtung vom ~~MICROBEAT~~ PLUS ein: Wenn Du <span style="color: #4169E1;">'''Nick nach vorne'''</span> bewegst, dann muss die Status LED <span style="color: #4169E1;">'''blau'''</span> leuchten. Wenn Du <span style="color: #DC143C;">'''Nick nach hinten'''</span> ziehst, muss die Status LED <span style="color: #DC143C;">'''rot'''</span> leuchten. Bei <span style="color: #4169E1;">'''Roll nach rechts'''</span>, muss die Status LED <span style="color: #4169E1;">'''blau'''</span> leuchten. <span style="color: #DC143C;">'''Roll nach links'''</span> muss die Status LED <span style="color: #DC143C;">'''rot'''</span> leuchten lassen. '''Wenn die Anzeige falsch ist (rot = rechts oder vor oder blau = links oder zurück) dann kannst Du die Anzeige (bzw. die interne Steuerrichtung vom MICROBEAST PLUS) durch kurzes Antippen des Hecksteuerknüppels umdrehen''' Es gibt insgesamt vier Optionen, nur eine einzige ist richtig! Kurz: <span style="color: #4169E1;">'''Roll rechts + Nick vor lässt die Status LED blau leuchten'''</span>, <span style="color: #DC143C;">'''Roll links + Nick zurück lässt die Status LED rot leuchten.'''</span> Wenn die LED violett ist oder in einer anderen Farbe leuchtet, dann ist die falsche Option ausgewählt.<br />		2. Stelle jetzt die interne Steuerrichtung vom MICROBEAST PLUS ein: Wenn Du <span style="color: #4169E1;">'''Nick nach vorne'''</span> bewegst, dann muss die Status LED <span style="color: #4169E1;">'''blau'''</span> leuchten. Wenn Du <span style="color: #DC143C;">'''Nick nach hinten'''</span> ziehst, muss die Status LED <span style="color: #DC143C;">'''rot'''</span> leuchten. Bei <span style="color: #4169E1;">'''Roll nach rechts'''</span>, muss die Status LED <span style="color: #4169E1;">'''blau'''</span> leuchten. <span style="color: #DC143C;">'''Roll nach links'''</span> muss die Status LED <span style="color: #DC143C;">'''rot'''</span> leuchten lassen. '''Wenn die Anzeige falsch ist (rot = rechts oder vor oder blau = links oder zurück) dann kannst Du die Anzeige (bzw. die interne Steuerrichtung vom MICROBEAST PLUS) durch kurzes Antippen des Hecksteuerknüppels umdrehen''' Es gibt insgesamt vier Optionen, nur eine einzige ist richtig! Kurz: <span style="color: #4169E1;">'''Roll rechts + Nick vor lässt die Status LED blau leuchten'''</span>, <span style="color: #DC143C;">'''Roll links + Nick zurück lässt die Status LED rot leuchten.'''</span> Wenn die LED violett ist oder in einer anderen Farbe leuchtet, dann ist die falsche Option ausgewählt.<br />
	<br />		<br />
	3. Optional: Wenn Du den/die Steuerknüppel bis zur Maximalposition bewegst, dann sollte die Status LED dauerhaft leuchten, nicht nur blinken. Falls das nicht der Fall ist, '''vergrößere den Steuerausschlag/Servoweg im Fernsteuersender für den jeweiligen Steuerkanal genau so weit, dass die Status LED gerade von blinkend auf dauerhaft leuchtend wechselt, wenn der Knüppel die Maximalposition erreicht'''. (Hinweis: Stelle den Servoweg aber nicht zu groß ein. Wenn die LED schon lange vor der Maximalposition leuchtet, reduziere den Ausschlag im Sender entsprechend.)<br />		3. Optional: Wenn Du den/die Steuerknüppel bis zur Maximalposition bewegst, dann sollte die Status LED dauerhaft leuchten, nicht nur blinken. Falls das nicht der Fall ist, '''vergrößere den Steuerausschlag/Servoweg im Fernsteuersender für den jeweiligen Steuerkanal genau so weit, dass die Status LED gerade von blinkend auf dauerhaft leuchtend wechselt, wenn der Knüppel die Maximalposition erreicht'''. (Hinweis: Stelle den Servoweg aber nicht zu groß ein. Wenn die LED schon lange vor der Maximalposition leuchtet, reduziere den Ausschlag im Sender entsprechend.)<br />

Shornstein at 17:30, 9 January 2018

2018-01-09T17:30:51Z

← Older revision		Revision as of 17:30, 9 January 2018
Line 1:		Line 1:
	= ~~Adjustment on the device~~ =		=Einstellung am Gerät=
	1. ~~Move the stick(s) for aileron and elevator on the radio and check whether the swashplate is moved correctly on the helicopter~~.~~<br />~~		1. Falls noch nicht gemacht, steuere Roll und Nick und prüfe, ob die Taumelscheibe in die richtige Richtung gesteuert wird. Sie muss genau der Steuerknüppelbewegung folgen: Nick nach vorne kippt die Taumelscheibe nach vorn, Roll nach rechts kippt die
	~~(Note for beginners~~: ~~the swashplate must follow the stick movement~~, ~~so pushing elevator forward will tilt the swashplate forwards, adding aileron to the right will move the swash to the right and so on~~.)<br />		Taumelscheibe nach rechts usw. .<br />
	'''~~If the stick is moving the swashplate into the wrong direction use the reverse function of your transmitter~~''' ~~and reverse the aileron and~~/~~or elevator channel in the transmitter to set stick control direction correctly~~.<br />		'''Falls die Taumelscheibe in die entgegengesetzte Richtung kippt, verwende die Servoumkehr im Fernsteuersender''' und drehe die Servolaufrichtung/Steuerrichtung für den Roll- oder Nick-Steuerkanal entsprechend um.<br />
	<br />		<br />
	2. ~~Now set the internal control direction of the MICROBEAST~~ PLUS ~~gyro~~: ~~When you push elevator~~ <span style="color: #4169E1;">'''~~forwards~~'''</span>, ~~the~~ Status LED ~~must light up or flash in~~ <span style="color: #4169E1;">'''~~blue~~'''</span> ~~color~~. ~~When you pull elevator~~ <span style="color: #DC143C;">'''~~backwards~~'''</span>, ~~the~~ Status LED ~~must light up or flash in~~ <span style="color: #DC143C;">'''~~red~~'''</span> ~~color~~. ~~When you move aileron to the~~ <span style="color: #4169E1;">'''~~right~~'''</span>, ~~the~~ Status LED ~~must light up or flash in~~ <span style="color: #4169E1;">'''~~blue~~'''</span> ~~color~~. ~~When you move aileron to the~~ <span style="color: #DC143C;">'''~~left~~'''</span>~~, the~~ Status LED ~~must light up or flash in~~ <span style="color: #DC143C;">'''~~red~~'''</span> ~~color~~. '''~~When the display is inverted~~ (~~red~~ = ~~right or forwards and blue~~ = ~~left or backwards~~) ~~reverse the display~~ (~~internal control direction~~) ~~by tapping the rudder stick.~~''' ~~There are four possible options~~, ~~only one is correct~~! ~~In short~~: <span style="color: #4169E1;">'''~~aileron right~~ + ~~elevator forwards the~~ Status LED ~~must be blue~~'''</span>, <span style="color: #DC143C;">'''~~aileron left~~ + ~~elevator backwards the~~ Status LED ~~must be red~~.'''</span> ~~When the~~ LED ~~is purple or shines~~ in ~~the contrary color~~, ~~you've not set the correct option~~.<br />		2. Stelle jetzt die interne Steuerrichtung vom MICROBEAT PLUS ein: Wenn Du <span style="color: #4169E1;">'''Nick nach vorne'''</span> bewegst, dann muss die Status LED <span style="color: #4169E1;">'''blau'''</span> leuchten. Wenn Du <span style="color: #DC143C;">'''Nick nach hinten'''</span> ziehst, muss die Status LED <span style="color: #DC143C;">'''rot'''</span> leuchten. Bei <span style="color: #4169E1;">'''Roll nach rechts'''</span>, muss die Status LED <span style="color: #4169E1;">'''blau'''</span> leuchten. <span style="color: #DC143C;">'''Roll nach links'''</span> muss die Status LED <span style="color: #DC143C;">'''rot'''</span> leuchten lassen. '''Wenn die Anzeige falsch ist (rot = rechts oder vor oder blau = links oder zurück) dann kannst Du die Anzeige (bzw. die interne Steuerrichtung vom MICROBEAST PLUS) durch kurzes Antippen des Hecksteuerknüppels umdrehen''' Es gibt insgesamt vier Optionen, nur eine einzige ist richtig! Kurz: <span style="color: #4169E1;">'''Roll rechts + Nick vor lässt die Status LED blau leuchten'''</span>, <span style="color: #DC143C;">'''Roll links + Nick zurück lässt die Status LED rot leuchten.'''</span> Wenn die LED violett ist oder in einer anderen Farbe leuchtet, dann ist die falsche Option ausgewählt.<br />
	<br />		<br />
	3. Optional: ~~When you move stick(s) to full deflection~~, ~~the~~ Status LED ~~should light solid~~, ~~not just flash~~. ~~If this is not the case~~, '''~~increase the servo throw~~/~~endpoint of the aileron and elevator channel in the transmitter just as far~~ so ~~that the~~ Status LED ~~changes from flashing to solid when the stick(s) reach the end position~~'''. (~~Note~~: ~~Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position~~. ~~So the Status~~ LED ~~should just changes from flashing to solid when reaching the end position~~.)<br />		3. Optional: Wenn Du den/die Steuerknüppel bis zur Maximalposition bewegst, dann sollte die Status LED dauerhaft leuchten, nicht nur blinken. Falls das nicht der Fall ist, '''vergrößere den Steuerausschlag/Servoweg im Fernsteuersender für den jeweiligen Steuerkanal genau so weit, dass die Status LED gerade von blinkend auf dauerhaft leuchtend wechselt, wenn der Knüppel die Maximalposition erreicht'''. (Hinweis: Stelle den Servoweg aber nicht zu groß ein. Wenn die LED schon lange vor der Maximalposition leuchtet, reduziere den Ausschlag im Sender entsprechend.)<br />
	<br />		<br />
	{{QUOTE\|~~Always set servo direction in the transmitter first~~, ~~then check the display on the~~ MICROBEAST PLUS ~~or in the software and change the internal control direction if it does not match the real direction~~. '''~~Do not change the internal direction in order to change the servo direction~~! ~~This is only used for telling the gyro~~ in ~~which direction it must move the swashplate~~.''' ~~Be very conscientious when doing this setup step~~, ~~as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter~~!<br />		{{QUOTE\|Stelle immer zuerst die Steuerrichtung über den Sender ein, prüfe dann die interne Steuerrichtung vom MICROBEAST PLUS und passe diese falls nötig an die tatsächliche Steuerrichtung an. '''Ändere nie die interne Steuerrichtung, um die Servolaufrichtungen zu ändern! Die interne Steuerrichtung dient nur dazu, dem System zu zeigen, in welche Richtung es die Taumelscheibe steuern muss, um Drehbewegungen auszuführen.''' Sei bei der Einstellung sehr gewissenhaft und prüfe sie mehrfach, eine falsche Einstellung führt dazu, dass das System in die falsche Richtung steuert und der Heli wird daher mit großer Wahrscheinlichkeit unkontrollierbar sein und abstürzen!<br />
	<br />		<br />
	'''~~In addition you can check the gyro direction by turning the helicopter by hand around its horizontal and longitudinal axis~~.''' ~~When turning the heli the gyro must move the swashplate~~ so ~~that the rotor will produce a counter action agains the turn direction~~. ~~So later in flight the gyro will stop the helicopter from unwanted movement. Here the~~ LED ~~will always light up in~~ '''~~blue~~''' ~~color when you turn the helicopter to the~~ '''~~right~~''' or '''~~forwards~~''' ~~and light up in~~ '''~~red~~''' ~~when you turn it to the~~ '''~~left~~''' or '''~~backwards~~'''. ~~This is to give you a little reminder when you need to do the setup later on the field and you can't rememeber what color stands for what direction~~!}}<br />		'''Zusätzlich kann die Steuerrichtung auch geprüft werden, wenn der Heli von Hand gekippt und geneigt wird.''' Hier muss das System bei korrekt eingestellter Steuerrichtung die Taumelscheibe immer entgegen der Bewegung steuern, so wie es das später im Flug machen wird, wenn der Heli eine ungewollte Drehung macht. Beachte dass hier die Status LED immer '''blau''' leuchten wird, wenn Du den Heli nach '''rechts''' oder nach '''vorne''' kippst und '''rot''' leuchtet, wenn Du den Heli nach '''links''' oder '''hinten''' kippst. Diese soll Dir eine kleine Hilfestellung geben, wenn Du später auf dem Flugfeld die Einstellung machst und Dich nicht erinnern kannst, welche Farbe für welche Steuerrichtung steht!}}<br />
	<br />		<br />
	<br />		<br />

FuzzyBot: Importing a new version from external source

2017-11-30T15:01:51Z

Importing a new version from external source

New page

= Adjustment on the device =
1. Move the stick(s) for aileron and elevator on the radio and check whether the swashplate is moved correctly on the helicopter. 
(Note for beginners: the swashplate must follow the stick movement, so pushing elevator forward will tilt the swashplate forwards, adding aileron to the right will move the swash to the right and so on.) 
'''If the stick is moving the swashplate into the wrong direction use the reverse function of your transmitter''' and reverse the aileron and/or elevator channel in the transmitter to set stick control direction correctly. 
 
2. Now set the internal control direction of the MICROBEAST PLUS gyro: When you push elevator '''forwards''', the Status LED must light up or flash in '''blue''' color. When you pull elevator '''backwards''', the Status LED must light up or flash in '''red''' color. When you move aileron to the '''right''', the Status LED must light up or flash in '''blue''' color. When you move aileron to the '''left''', the Status LED must light up or flash in '''red''' color. '''When the display is inverted (red = right or forwards and blue = left or backwards) reverse the display (internal control direction) by tapping the rudder stick.''' There are four possible options, only one is correct! In short: '''aileron right + elevator forwards the Status LED must be blue''', '''aileron left + elevator backwards the Status LED must be red.''' When the LED is purple or shines in the contrary color, you've not set the correct option. 
 
3. Optional: When you move stick(s) to full deflection, the Status LED should light solid, not just flash. If this is not the case, '''increase the servo throw/endpoint of the aileron and elevator channel in the transmitter just as far so that the Status LED changes from flashing to solid when the stick(s) reach the end position'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just changes from flashing to solid when reaching the end position.) 
 
{{QUOTE|Always set servo direction in the transmitter first, then check the display on the MICROBEAST PLUS or in the software and change the internal control direction if it does not match the real direction. '''Do not change the internal direction in order to change the servo direction! This is only used for telling the gyro in which direction it must move the swashplate.''' Be very conscientious when doing this setup step, as wrong gyro direction will cause loss of control during takeoff and you probably crash the helicopter! 
 
'''In addition you can check the gyro direction by turning the helicopter by hand around its horizontal and longitudinal axis.''' When turning the heli the gyro must move the swashplate so that the rotor will produce a counter action agains the turn direction. So later in flight the gyro will stop the helicopter from unwanted movement. Here the LED will always light up in '''blue''' color when you turn the helicopter to the '''right''' or '''forwards''' and light up in '''red''' when you turn it to the '''left''' or '''backwards'''. This is to give you a little reminder when you need to do the setup later on the field and you can't rememeber what color stands for what direction!}}