Translations:Manuals:MBPlusFblV52:Radio System/6/en - Revision history

FuzzyBot: Importing a new version from external source

2023-02-23T10:37:54Z

Importing a new version from external source

← Older revision		Revision as of 10:37, 23 February 2023
Line 1:		Line 1:
	=Remote ~~satellite~~ (Spektrum® ~~DSM~~/~~JR® DMSS/ALIGN® iBus)=~~		'''Remote receivers''' (Spektrum® DSMX/DSM2, JR® DMSS, ALIGN® iBus) can be directly connected to the white pin board at the side of MICROBEAST ULTRA. Here the receiver will be powered with a stabilized voltage of 3.3 Volts! Voltage is the first pin from the front/right, Minus is the second pin from the right, Signal is connected at the third pin from the right.<br />
	A special type of single-line receiver is the remote satellite. These receivers usually serve as additional receiving unit in combination with a (bigger) main receiver to provide a more robust and fail safe radio system. With MICROBEAST PLUS you can use such receivers as stand alone receiving unit to achieve a small and light weight radio system for small sized rc models. MICROBEAST PLUS supports the following systems: Spektrum® DSM2~~, Spektrum® DSMX~~, JR® DMSS ~~and~~ ALIGN® iBus~~. The remote receiver~~ can be directly connected to the white pin board at the side of MICROBEAST ~~PLUS~~. Here the receiver will be powered with a stabilized voltage of 3.3 Volts~~. Alternatively if you own~~ the ~~optional available Spektrum® satellite adapter (Order Nr. BXA76009) you can connect~~ the ~~receiver at~~ the ~~front~~ pin ~~board to~~ the ~~[DI1] digital input~~, ~~just like most other single-wire receivers. This allows to keep~~ the ~~white~~ pin ~~board free for connecting a sensor~~.<br />
	<br />		<br />
	'''Please note:''' MICROBEAST PLUS ~~does not~~ support connecting more than one remote satellite at a time!<br />		'''Please note:''' MICROBEAST PLUS doesn't support connecting more than one remote satellite at a time!<br />
	<br />		<br />
	{\|cellspacing="20" style="text-align:center;"		{\|cellspacing="20" style="text-align:center;"
Line 12:		Line 11:
	\|}		\|}
	<br />		<br />
	When using a speed controller with BEC, the power will be distributed from [CH5] input to receiver and servos. Alternatively or additionally you can connect a power supply/second BEC wire/buffering battery to the [SYS] port.<br />		{{WARNING_QUOTE\|'''Using a remote satellite is only recommended for small rc models (helicopters of 450 size or smaller).''' Due to the design, one single receiving unit is more prone to radio interference and can result in reduced transmission range!}}<br />
	~~<br />~~
	{{WARNING_QUOTE\|'''Using a remote satellite is only recommended for small rc ~~modells like~~ helicopters of 450 size or smaller.''' Due to the design, one single receiving unit is more prone to radio interference and can result in reduced transmission range.}}<br />
	<br />		<br />
	<br />		<br />

FuzzyBot: Importing a new version from external source

2020-10-01T07:40:14Z

Importing a new version from external source

← Older revision		Revision as of 07:40, 1 October 2020
Line 1:		Line 1:
	=Spektrum® DSM/JR® DMSS ~~remote satellite~~=		=Remote satellite (Spektrum® DSM/JR® DMSS/ALIGN® iBus)=
	A special type of single-line receiver is the remote satellite. These receivers ~~are~~ usually ~~used~~ as additional receiving unit in combination with a (bigger) main receiver to provide a more robust and fail safe radio system. ~~But also~~ you can ~~directly connect one of~~ such receivers ~~to MICROBEAST PLUS~~ to achieve a small and light weight radio system ~~to be used in~~ small sized rc models. MICROBEAST PLUS supports the following systems: Spektrum® DSM2, Spektrum® DSMX, JR® DMSS. The remote receiver can be directly connected to the ~~small sized~~ white pin board at the side ~~which~~ will ~~provide~~ a stabilized voltage of 3.3 Volts ~~which is necessary to power these receivers~~. Alternatively if you ~~have~~ the optional available Spektrum® satellite adapter (Order Nr. BXA76009) ~~also~~ you can connect the receiver at the front to the [DI1] ~~port~~, just like ~~any~~ other single-wire ~~receiver, so you can~~ keep the pin board free for connecting a sensor.<br />		A special type of single-line receiver is the remote satellite. These receivers usually serve as additional receiving unit in combination with a (bigger) main receiver to provide a more robust and fail safe radio system. With MICROBEAST PLUS you can use such receivers as stand alone receiving unit to achieve a small and light weight radio system for small sized rc models. MICROBEAST PLUS supports the following systems: Spektrum® DSM2, Spektrum® DSMX, JR® DMSS and ALIGN® iBus. The remote receiver can be directly connected to the white pin board at the side of MICROBEAST PLUS. Here the receiver will be powered with a stabilized voltage of 3.3 Volts. Alternatively if you own the optional available Spektrum® satellite adapter (Order Nr. BXA76009) you can connect the receiver at the front pin board to the [DI1] digital input, just like most other single-wire receivers. This allows to keep the white pin board free for connecting a sensor.<br />
	<br />		<br />
	'''Please note:''' MICROBEAST PLUS does not support connecting more than one remote satellite at a time!<br />		'''Please note:''' MICROBEAST PLUS does not support connecting more than one remote satellite at a time!<br />
Line 14:		Line 14:
	When using a speed controller with BEC, the power will be distributed from [CH5] input to receiver and servos. Alternatively or additionally you can connect a power supply/second BEC wire/buffering battery to the [SYS] port.<br />		When using a speed controller with BEC, the power will be distributed from [CH5] input to receiver and servos. Alternatively or additionally you can connect a power supply/second BEC wire/buffering battery to the [SYS] port.<br />
	<br />		<br />
	{{WARNING_QUOTE\|'''Using a remote satellite is only recommended for small rc modells like helicopters of 450 size or smaller.''' Due to the design one single receiving unit is more prone to radio interference and can result in reduced transmission range.}}<br />		{{WARNING_QUOTE\|'''Using a remote satellite is only recommended for small rc modells like helicopters of 450 size or smaller.''' Due to the design, one single receiving unit is more prone to radio interference and can result in reduced transmission range.}}<br />
	<br />		<br />
	<br />		<br />

FuzzyBot: Importing a new version from external source

2020-09-29T14:31:44Z

Importing a new version from external source

← Older revision		Revision as of 14:31, 29 September 2020
Line 10:		Line 10:
	\| JR®/Spektrum® remote satellite connected at side pin board		\| JR®/Spektrum® remote satellite connected at side pin board
	\| JR®/Spektrum® remote satellite connection with power adapter		\| JR®/Spektrum® remote satellite connection with power adapter
	\|}~~<br />~~		\|}
	<br />		<br />
	When using a speed controller with BEC, the power will be distributed from [CH5] input to receiver and servos. Alternatively or additionally you can connect a power supply/second BEC wire/buffering battery to the [SYS] port.<br />		When using a speed controller with BEC, the power will be distributed from [CH5] input to receiver and servos. Alternatively or additionally you can connect a power supply/second BEC wire/buffering battery to the [SYS] port.<br />
	<br />		<br />
	{{WARNING_QUOTE\|'''Using a remote satellite is only recommended for small rc modells like helicopters of 450 size or smaller.''' Due to the design one single receiving unit is more prone to radio interference and can result in reduced transmission range.}}<br />		{{WARNING_QUOTE\|'''Using a remote satellite is only recommended for small rc modells like helicopters of 450 size or smaller.''' Due to the design one single receiving unit is more prone to radio interference and can result in reduced transmission range.}}<br />
			<br />
	<br />		<br />

FuzzyBot: Importing a new version from external source

2020-09-25T13:05:26Z

Importing a new version from external source

New page

=Spektrum® DSM/JR® DMSS remote satellite=
A special type of single-line receiver is the remote satellite. These receivers are usually used as additional receiving unit in combination with a (bigger) main receiver to provide a more robust and fail safe radio system. But also you can directly connect one of such receivers to MICROBEAST PLUS to achieve a small and light weight radio system to be used in small sized rc models. MICROBEAST PLUS supports the following systems: Spektrum® DSM2, Spektrum® DSMX, JR® DMSS. The remote receiver can be directly connected to the small sized white pin board at the side which will provide a stabilized voltage of 3.3 Volts which is necessary to power these receivers. Alternatively if you have the optional available Spektrum® satellite adapter (Order Nr. BXA76009) also you can connect the receiver at the front to the [DI1] port, just like any other single-wire receiver, so you can keep the pin board free for connecting a sensor. 
 
'''Please note:''' MICROBEAST PLUS does not support connecting more than one remote satellite at a time! 
 
{|cellspacing="20" style="text-align:center;"
|[[Image:Mbplus_spektrum_rx2.png | x100px]]
|[[Image:Spektrum_RX_Sat.png | x150px]]
|- style="text-align:center; font-size:75%;"
| JR®/Spektrum® remote satellite connected at side pin board
| JR®/Spektrum® remote satellite connection with power adapter
|} 
 
When using a speed controller with BEC, the power will be distributed from [CH5] input to receiver and servos. Alternatively or additionally you can connect a power supply/second BEC wire/buffering battery to the [SYS] port. 
 
{{WARNING_QUOTE|'''Using a remote satellite is only recommended for small rc modells like helicopters of 450 size or smaller.''' Due to the design one single receiving unit is more prone to radio interference and can result in reduced transmission range.}}