FuzzyBot: Importing a new version from external source

2022-03-30T08:24:09Z

Importing a new version from external source

← Older revision		Revision as of 08:24, 30 March 2022
Line 1:		Line 1:
	=Adjustment on the device=		=Adjustment on the device=
	If not already done power up your radio and MICROBEAST PLUS and wait until initialization sequence is finished. At first the system will calibrate to the radio system, Menu LEDs H to N will cycle up and down. '''During this time do not move the sticks on your radio as the system is learning the stick mid positions.''' In the second step MICROBEAST PLUS checks if the sensors are working correctly and learns the sensor rest positions. Here Menu LEDs A to G will cycle up and down. '''During this time do not move the helicopter.''' When initialization is completed the Status LED will change to blue or purple color indicating the current gyro mode. If you can't get through the initialization sequence either because LEDs A-G or LEDs H-N don't stop cycling please read [[Help:FAQ:Powerup/en\|the FAQ]]. Note that during initialization pressing the button has no significant effect and you will not be able to enter any menu.</p>
	~~<br />~~
	Now when the system is ready to operate press the button and hold it for at least 3 seconds. First the Menu-LED next to Menu Point A will begin to flash and then after a while will be solid. Now and only now you can release the button.		Now when the system is ready to operate press the button and hold it for at least 3 seconds. First the Menu-LED next to Menu Point A will begin to flash and then after a while will be solid. Now and only now you can release the button.
	<br />		<br />

FuzzyBot: Importing a new version from external source

2020-10-20T13:02:10Z

Importing a new version from external source

New page

=Adjustment on the device=
If not already done power up your radio and MICROBEAST PLUS and wait until initialization sequence is finished. At first the system will calibrate to the radio system, Menu LEDs H to N will cycle up and down. '''During this time do not move the sticks on your radio as the system is learning the stick mid positions.''' In the second step MICROBEAST PLUS checks if the sensors are working correctly and learns the sensor rest positions. Here Menu LEDs A to G will cycle up and down. '''During this time do not move the helicopter.''' When initialization is completed the Status LED will change to blue or purple color indicating the current gyro mode. If you can't get through the initialization sequence either because LEDs A-G or LEDs H-N don't stop cycling please read [[Help:FAQ:Powerup/en|the FAQ]]. Note that during initialization pressing the button has no significant effect and you will not be able to enter any menu.</p>
<br />
Now when the system is ready to operate press the button and hold it for at least 3 seconds. First the Menu-LED next to Menu Point A will begin to flash and then after a while will be solid. Now and only now you can release the button.
<br />
<div class="noprint">
[[Image:Setupmenu_open.png|x170px|none]]
</div>
<div class="onlyinprint">
[[Image:Setupmenu_open.png|x150px|none]]
</div>
<br />

Translations:Manuals:MBPlusFblV52:Setupmenu intro/3/en - Revision history

FuzzyBot: Importing a new version from external source

FuzzyBot: Importing a new version from external source