User contributions
19 April 2024
Manuals:BXFbl:Setupmenu intro/de
Created page with "In den folgenden Abschnitten beschreiben wir die nötigen Einstellungen im Detail. Vorher geben wir einen Überblick zu den Geräten und den unterschiedlichen Einstellmethoden..."
-56
Translations:Manuals:BXFbl:Setupmenu intro/9/de
Created page with "In den folgenden Abschnitten beschreiben wir die nötigen Einstellungen im Detail. Vorher geben wir einen Überblick zu den Geräten und den unterschiedlichen Einstellmethoden..."
Manuals:BXFbl:Setupmenu intro/de
Created page with "<p> Vor dem ersten Flug muss das BEASTX-System an die Mechanik des Helis und seine Komponenten angepasst werden. Dieser grundlegende Einrichtungsvorgang wird im SETUPMENÜ dur..."
+212
Translations:Manuals:BXFbl:Setupmenu intro/2/de
Created page with "<p> Vor dem ersten Flug muss das BEASTX-System an die Mechanik des Helis und seine Komponenten angepasst werden. Dieser grundlegende Einrichtungsvorgang wird im SETUPMENÜ dur..."
Translations:Manuals:BXFbl:Setupmenu intro/Page display title/de
Created page with "Grundeinstellung"
Translations:Manuals:BXFbl:Setupmenu overview/Page display title/de
no edit summary
-1
Help:FAQ:General
no edit summary
Help:FAQ:General/de
Created page with "==NANOBEAST== <br /> '''5.9.4'''<br /> :* Einstellmöglichkeit über das mitgelieferte Schalterkabel :* Alle Funktionen von MICROBEAST PLUS / ULTRA übernommen (z.B. Empfänge..."
+35
Translations:Help:FAQ:General/24/de
Created page with "==NANOBEAST== <br /> '''5.9.4'''<br /> :* Einstellmöglichkeit über das mitgelieferte Schalterkabel :* Alle Funktionen von MICROBEAST PLUS / ULTRA übernommen (z.B. Empfänge..."
Help:FAQ:General/de
no edit summary
+359
Translations:Help:FAQ:General/9/de
no edit summary
+399
Help:FAQ:General/de
no edit summary
+346
Translations:Help:FAQ:General/19/de
no edit summary
+386
Help:FAQ:General
Marked this version for translation
+12
Help:FAQ:General
no edit summary
+175
Help:FAQ:General
no edit summary
+1,152
Manuals:BXFbl:Setupmenu overview/de
no edit summary
+17
Translations:Manuals:BXFbl:Setupmenu overview/7/de
no edit summary
+17
Manuals:BXFbl:Setupmenu overview/de
no edit summary
+18
Translations:Manuals:BXFbl:Setupmenu overview/7/de
no edit summary
+18
Manuals:BXFbl:Setupmenu overview
no edit summary
+2
Manuals:BXFbl:Setupmenu overview
no edit summary
+331
Manuals:BXFbl:Setupmenu overview
no edit summary
+28
Manuals:BXFbl:Setupmenu overview
no edit summary
+7
Manuals:BXFbl:Setupmenu overview
no edit summary
-9
Manuals:BXFbl:Setupmenu overview/de
no edit summary
-2
Translations:Manuals:BXFbl:Setupmenu overview/7/de
no edit summary
-2
Manuals:BXFbl:Setupmenu overview/de
no edit summary
-8
Translations:Manuals:BXFbl:Setupmenu overview/20/de
no edit summary
-8
Manuals:BXFbl:Setupmenu overview/de
no edit summary
+16
Translations:Manuals:BXFbl:Setupmenu overview/21/de
no edit summary
+16
Translations:Manuals:BXFbl:Setupmenu overview/21/de
Created page with "= N - Governor = Tap rudder stick to select governor mode (change LED color). When not using the internal governor feature (Status LED off), setup will end here. When using el..."
Manuals:BXFbl:Setupmenu overview/de
Created page with "= M - Zykl. Wegbegrenzung = Move thrust/collective stick on the radio to highest position. Carefully push cyclics (roll/aileron and pitch/elevator) to end positions. Check if..."
+8
Translations:Manuals:BXFbl:Setupmenu overview/20/de
Created page with "= M - Zykl. Wegbegrenzung = Move thrust/collective stick on the radio to highest position. Carefully push cyclics (roll/aileron and pitch/elevator) to end positions. Check if..."
Manuals:BXFbl:Setupmenu overview/de
Created page with "= L - Pitch = 1. Move thrust/collective stick and check directions. If servos are moving the swashplate in wrong direction, use servo reverse function on radio to invert thrus..."
-11
Translations:Manuals:BXFbl:Setupmenu overview/19/de
Created page with "= L - Pitch = 1. Move thrust/collective stick and check directions. If servos are moving the swashplate in wrong direction, use servo reverse function on radio to invert thrus..."
Manuals:BXFbl:Setupmenu overview/de
Created page with "= K - Zykl. Steuerweg = Status LED off: Make sure blade pitch is 0.0° and swashplate is level.<br /> <br /> Tap rudder stick to switch to adjustment position. Here tap or hol..."
+3
Translations:Manuals:BXFbl:Setupmenu overview/18/de
Created page with "= K - Zykl. Steuerweg = Status LED off: Make sure blade pitch is 0.0° and swashplate is level.<br /> <br /> Tap rudder stick to switch to adjustment position. Here tap or hol..."
Manuals:BXFbl:Setupmenu overview/de
Created page with "= J - Servomitten = Tap rudder stick to select one servo after another. If necessary, tap/hold the roll/aileron stick to adjust the servo center position. All servos should fo..."
+1
Translations:Manuals:BXFbl:Setupmenu overview/17/de
Created page with "= J - Servomitten = Tap rudder stick to select one servo after another. If necessary, tap/hold the roll/aileron stick to adjust the servo center position. All servos should fo..."
Manuals:BXFbl:Setupmenu overview/de
Created page with "= I - Steuerrichtungen = 1. Move roll/aileron to the right and push pitch/elevator forwards. Check cyclic swashplate movement. The swash should move forwards and right as well..."
-1
Translations:Manuals:BXFbl:Setupmenu overview/16/de
Created page with "= I - Steuerrichtungen = 1. Move roll/aileron to the right and push pitch/elevator forwards. Check cyclic swashplate movement. The swash should move forwards and right as well..."
Manuals:BXFbl:Setupmenu overview/de
Created page with "= H - Servo Richtungen = Tap rudder stick to select one servo after another. Move collective pitch on the radio and check servo directions. All servos must move the swash plat..."
Translations:Manuals:BXFbl:Setupmenu overview/15/de
Created page with "= H - Servo Richtungen = Tap rudder stick to select one servo after another. Move collective pitch on the radio and check servo directions. All servos must move the swash plat..."
Manuals:BXFbl:Setupmenu overview/de
Created page with "= G - Taumelscheibe = Tap rudder stick to select swash plate type and swash mixing (change LED color). Most R/C helis use 120° eCCPM mixing. Check your heli's manual for more..."
+1
Translations:Manuals:BXFbl:Setupmenu overview/14/de
Created page with "= G - Taumelscheibe = Tap rudder stick to select swash plate type and swash mixing (change LED color). Most R/C helis use 120° eCCPM mixing. Check your heli's manual for more..."
Manuals:BXFbl:Setupmenu overview/de
Created page with "= F - Heck Richtung = 1. Move rudder left/right. Servo should move tail left/right accordingly. If stick direction is inverted, use servo reverse function on radio to reverse..."
-3
Translations:Manuals:BXFbl:Setupmenu overview/13/de
Created page with "= F - Heck Richtung = 1. Move rudder left/right. Servo should move tail left/right accordingly. If stick direction is inverted, use servo reverse function on radio to reverse..."
Manuals:BXFbl:Setupmenu overview/de
Created page with "= E - Heck Limit = Use rudder stick (hold or tap) to move servo to one endpoint. Wait until LED flashes, then move all the way to the other endpoint. Wait again until LED flas..."
-2
Translations:Manuals:BXFbl:Setupmenu overview/12/de
Created page with "= E - Heck Limit = Use rudder stick (hold or tap) to move servo to one endpoint. Wait until LED flashes, then move all the way to the other endpoint. Wait again until LED flas..."