Difference between revisions of "Translations:Help:FAQ:Gyro/2/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 10:51, 16 May 2017

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Help:FAQ:Gyro)
==The gyro sensors do not seem to work correctly.==
''The rudder servo does not react or reacts very slowly to rotation of the helicopter. (The same happens to the elevator axis.)''<br />
<br />
Probably the gain of tail gyro is too low.
* Check assignment of gain channel and adjust the gain in the transmitter as described [[Manuals:MB_Plus:Flying|here]].
* Check for correct wiring or setup of tail gain cable/channel.
Additionally when the elevator doesn't seem to work either, maybe the wrong mounting orientation has been selected. So select the correct mounting orientation in Setup menu point '''A'''.<br />
<br />
Translation==The gyro sensors do not seem to work correctly.==
''The rudder servo does not react or reacts very slowly to rotation of the helicopter. (The same happens to the elevator axis.)''<br />
<br />
Probably the gain of tail gyro is too low.
* Check assignment of gain channel and adjust the gain in the transmitter as described [[Manuals:MB_Plus:Flying|here]].
* Check for correct wiring or setup of tail gain cable/channel.
Additionally when the elevator doesn't seem to work either, maybe the wrong mounting orientation has been selected. So select the correct mounting orientation in Setup menu point '''A'''.<br />
<br />

The gyro sensors do not seem to work correctly.

The rudder servo does not react or reacts very slowly to rotation of the helicopter. (The same happens to the elevator axis.)

Probably the gain of tail gyro is too low.

  • Check assignment of gain channel and adjust the gain in the transmitter as described here.
  • Check for correct wiring or setup of tail gain cable/channel.

Additionally when the elevator doesn't seem to work either, maybe the wrong mounting orientation has been selected. So select the correct mounting orientation in Setup menu point A.