Difference between revisions of "Translations:Help:FAQ:Powerup/3/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 10:55, 16 May 2017

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Help:FAQ:Powerup)
==The brand new MICROBEAST only shows a red flashing LED, random LED sequence or even nothing. What's wrong?==
Check very carefully that all cables are plugged in correctly and all the plugs are connected properly at the correct position on both MICROBEAST and receiver side. Especially in the vertical direction make sure not just 2 pins sit on the header. Also make sure that the polarity is correct on all connections. Make sure your power supply (BEC or receiver battery) is capable to power all connected devices (servos, receiver, flybarless). When the power drain is too high this can cause a short drop in voltage making the system resart over and over again.<br />
<br />
Translation==The brand new MICROBEAST only shows a red flashing LED, random LED sequence or even nothing. What's wrong?==
Check very carefully that all cables are plugged in correctly and all the plugs are connected properly at the correct position on both MICROBEAST and receiver side. Especially in the vertical direction make sure not just 2 pins sit on the header. Also make sure that the polarity is correct on all connections. Make sure your power supply (BEC or receiver battery) is capable to power all connected devices (servos, receiver, flybarless). When the power drain is too high this can cause a short drop in voltage making the system resart over and over again.<br />
<br />

The brand new MICROBEAST only shows a red flashing LED, random LED sequence or even nothing. What's wrong?

Check very carefully that all cables are plugged in correctly and all the plugs are connected properly at the correct position on both MICROBEAST and receiver side. Especially in the vertical direction make sure not just 2 pins sit on the header. Also make sure that the polarity is correct on all connections. Make sure your power supply (BEC or receiver battery) is capable to power all connected devices (servos, receiver, flybarless). When the power drain is too high this can cause a short drop in voltage making the system resart over and over again.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Help:FAQ:Powerup/3/en&oldid=11663"