Revision as of 11:03, 6 November 2017
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV5:Intro )
<p>'''Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 5.x.x!'''</p> <p>The firmware version can be detected by connecting the device to a computer using the USB2SYS interface (optional) or tablet/smartphone using the BLE2SYS interface (optional) together with the StudioX App. During initialization also you can directly read from the display of the device what firmware version it is running: After power up when the Status-LED lights red, for a few seconds the Menu-LEDs A to G display the first digit of the firmware version and the LEDs H to N the second digit.</p> <br />
<p>'''Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 5.x.x!'''</p>
<p>The firmware version can be detected by connecting the device to a computer using the USB2SYS
interface (optional) or tablet/smartphone using the BLE2SYS interface (optional) together with the StudioX App. During initialization also you can directly read from the display of the device what firmware version it is running:
After power up when the Status-LED lights red, for a few seconds the Menu-LEDs A to G display the first digit of the firmware version and the LEDs H to N the
second digit.</p>
<br />
Translation ==Firmware version display== <p>'''Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 5.x.x!'''</p> <p>The firmware version can be detected by connecting the device to a computer using the USB2SYS interface (optional) or tablet/smartphone using the BLE2SYS interface (optional) together with the StudioX App. During initialization also you can directly read from the display of the device what firmware version it is running: After power up when the Status-LED lights red, for a few seconds the Menu-LEDs A to G display the first digit of the firmware version and the LEDs H to N the second digit.</p> <br /> Firmware version display
Please note that these instructions are only valid for the MICROBEAST PLUS firmware version 5.x.x!
The firmware version can be detected by connecting the device to a computer using the USB2SYS
interface (optional) or tablet/smartphone using the BLE2SYS interface (optional) together with the StudioX App. During initialization also you can directly read from the display of the device what firmware version it is running:
After power up when the Status-LED lights red, for a few seconds the Menu-LEDs A to G display the first digit of the firmware version and the LEDs H to N the
second digit.