Translations:Manuals:MBPlusFblV5:Setupmenu C/3/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
Newer edit →
FuzzyBot (talk | contribs)
8,042 edits
Importing a new version from external source
(No difference)

Revision as of 10:36, 30 November 2017

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV5:Setupmenu C)
=Adjustment on the device=
To select the desired rudder servo pulse width (servo type) move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point C:<br />
<br />
{{TABLEV5|Rudder servo center pulse length|760|960|1520}}<br />
'''Note:''' When you've set a different pulse width using the StudioXm App the Status LED will be '''off'''. You can change back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!<br />
<br />
<br />

Adjustment on the device

To select the desired rudder servo pulse width (servo type) move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point C:

Status-LED Rudder servo center pulse length
purple 960
red 760
blue 1520


Note: When you set a different pulse width using the StudioX or StudioXm App the Status LED will be off. You can change back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBPlusFblV5:Setupmenu_C/3/en&oldid=12637"