Bureaucrats, Administrators, translate-proofr
15,689
edits
Changes
Jump to navigation
Jump to search
Line 14:
Line 14: − + − + − + + + + Line 28:
Line 31: − + − + − + + + + Line 40:
Line 46: − + − + − + + + +
no edit summary
= Adjustment on the device =
= Adjustment on the device =
1. Move the thrust stick up and down and check whether the pitch is changing direction correctly. If not already done at SETUP MENU point I, '''use the reverse function for the pitch channel in the transmitter to reverse direction of pitch movement in case it is wrong'''.
1. Move the thrust stick up and down and check whether the pitch is changing direction correctly. If not already done at SETUP MENU point I, '''use the reverse function for the pitch channel in the transmitter to reverse direction of pitch movement in case it is wrong'''.<br />
2. Afterwards check the Status LED color: on <span style="color: #4169E1;">'''positive pitch'''</span> it must be <span style="color: #4169E1;">'''blue'''</span>, on <span style="color: #DC143C;">'''negative pitch'''</span> it must light in <span style="color: #DC143C;">'''red'''</span> color. '''In case the display is inverted (red = positive and blue = negative), tap the aileron stick once to reverse the internal pitch direction of MICROBEAST PLUS.'''
<br />
3. When you move thrust stick to full deflection the Status LED should light solid, not just flash. If this is not the case '''increase the servo throw/endpoint of the thrust channel in the transmitter for each direction just as far so that the Status LED changes from flashing to solid when the stick reaches the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)
2. Afterwards check the Status LED color: on <span style="color: #4169E1;">'''positive pitch'''</span> it must be <span style="color: #4169E1;">'''blue'''</span>, on <span style="color: #DC143C;">'''negative pitch'''</span> it must light in <span style="color: #DC143C;">'''red'''</span> color. '''In case the display is inverted (red = positive and blue = negative), tap the aileron stick once to reverse the internal pitch direction of MICROBEAST PLUS.'''<br />
<br />
3. When you move thrust stick to full deflection the Status LED should light solid, not just flash. If this is not the case '''increase the servo throw/endpoint of the thrust channel in the transmitter for each direction just as far so that the Status LED changes from flashing to solid when the stick reaches the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)<br />
<br />
4. Finally adjust the maximum collective pitch when the thrust stick is at full deflection. '''Increase or decrease the maximum amount of collective pitch with the rudder stick (left = decrease, right = increase)'''. Then move the thrust to full negative and again adjust the pitch using the rudder.<br />
4. Finally adjust the maximum collective pitch when the thrust stick is at full deflection. '''Increase or decrease the maximum amount of collective pitch with the rudder stick (left = decrease, right = increase)'''. Then move the thrust to full negative and again adjust the pitch using the rudder.<br />
<br />
<br />
[[File:SetupK.PNG|x250px]]<br />
[[File:SetupK.PNG|x250px]]<br />
<br />
<br />
1. Move the thrust stick up and down and check whether the pitch is changing direction correctly. If not already done at SETUP MENU point I, '''use the reverse function for the pitch channel in the transmitter to reverse direction of pitch movement in case it is wrong'''.
1. Move the thrust stick up and down and check whether the pitch is changing direction correctly. If not already done at SETUP MENU point I, '''use the reverse function for the pitch channel in the transmitter to reverse direction of pitch movement in case it is wrong'''.<br />
2. Afterwards check the Status LED color and display in the software: on <span style="color: #4169E1;">'''positive pitch'''</span> the Status LED must be <span style="color: #4169E1;">'''blue'''</span>, on <span style="color: #DC143C;">'''negative pitch'''</span> it must light in <span style="color: #DC143C;">'''red'''</span> color. '''In case the display is inverted (red = positive and blue = negative), tap the aileron stick once to reverse the internal pitch direction of MICROBEAST PLUS.'''
<br />
If the stick is not moving far enough, you will see the message "Move stick to max. position! Check Status LED." In this case '''increase the servo throw/endpoint of the thrust channel in the transmitter for each direction just as far so that the Status LED changes from flashing to solid and the label disappears in the software when the stick reaches the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)
2. Afterwards check the Status LED color and display in the software: on <span style="color: #4169E1;">'''positive pitch'''</span> the Status LED must be <span style="color: #4169E1;">'''blue'''</span>, on <span style="color: #DC143C;">'''negative pitch'''</span> it must light in <span style="color: #DC143C;">'''red'''</span> color. '''In case the display is inverted (red = positive and blue = negative), tap the aileron stick once to reverse the internal pitch direction of MICROBEAST PLUS.'''<br />
<br />
If the stick is not moving far enough, you will see the message "Move stick to max. position! Check Status LED." In this case '''increase the servo throw/endpoint of the thrust channel in the transmitter for each direction just as far so that the Status LED changes from flashing to solid and the label disappears in the software when the stick reaches the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)<br />
<br />
3. Finally adjust the maximum collective pitch when the thrust stick is at full deflection for each direction using the adjustment boxes in the software.<br />
3. Finally adjust the maximum collective pitch when the thrust stick is at full deflection for each direction using the adjustment boxes in the software.<br />
<br />
<br />
[[File:SetupK.PNG|x250px]]<br />
[[File:SetupK.PNG|x250px]]<br />
<br />
<br />
1. When you see the adjustment screen for the collective pitch move the thrust stick up and down and check whether the pitch is changing direction correctly. If not already done at SETUP MENU point I, '''use the reverse function for the pitch channel in the transmitter to reverse direction of pitch movement in case it is wrong'''.
1. When you see the adjustment screen for the collective pitch move the thrust stick up and down and check whether the pitch is changing direction correctly. If not already done at SETUP MENU point I, '''use the reverse function for the pitch channel in the transmitter to reverse direction of pitch movement in case it is wrong'''.<br />
2. Afterwards check the Status LED color and display in the app: on <span style="color: #4169E1;">'''positive pitch'''</span> the Status LED must be <span style="color: #4169E1;">'''blue'''</span>, on <span style="color: #DC143C;">'''negative pitch'''</span> it must light in <span style="color: #DC143C;">'''red'''</span> color. '''In case the display is inverted (red = positive and blue = negative), tap the aileron stick once to reverse the internal pitch direction of MICROBEAST PLUS.'''
<br />
If the stick is not moving far enough, you will see the message "Increase!". In this case '''increase the servo throw/endpoint of the thrust channel in the transmitter for each direction just as far so that the Status LED changes from flashing to solid and the label changes to "OK" in the software when the stick reaches the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)
2. Afterwards check the Status LED color and display in the app: on <span style="color: #4169E1;">'''positive pitch'''</span> the Status LED must be <span style="color: #4169E1;">'''blue'''</span>, on <span style="color: #DC143C;">'''negative pitch'''</span> it must light in <span style="color: #DC143C;">'''red'''</span> color. '''In case the display is inverted (red = positive and blue = negative), tap the aileron stick once to reverse the internal pitch direction of MICROBEAST PLUS.'''<br />
<br />
If the stick is not moving far enough, you will see the message "Increase!". In this case '''increase the servo throw/endpoint of the thrust channel in the transmitter for each direction just as far so that the Status LED changes from flashing to solid and the label changes to "OK" in the software when the stick reaches the end positions'''. (Note: Do not increase the endpoints too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when reaching the end position.)<br />
<br />
3. Finally adjust the maximum collective pitch when the thrust stick is at full deflection for each direction using the '''+''' and '''- buttons''' in the app.<br />
3. Finally adjust the maximum collective pitch when the thrust stick is at full deflection for each direction using the '''+''' and '''- buttons''' in the app.<br />
<br />
<br />