Revision as of 14:08, 20 December 2017
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV5:Governormenu D )
Similar to GOVERNOR MENU point A here we will only get some status information. At GOVERNOR MENU point D the different activation points of the Governor will be displayed based on color and state of the Status-LED. So you can prepare your transmitter for use with the Headspeed Governor function. The information conveyed by the Status-LED is basically the same in every Governor operation mode: <p>Governor off = '''off''', Autorotation = <font color="purple">'''purple'''</font>, Gov active = <font color="#FF3300">'''red'''</font> or <font color="#0066FF">'''blue'''</font> (= max. RPM)</p> However, the setup of the transmitter and the range of headspeed will be slightly different, depending on whether the mode '''electric''' or '''nitro''' is used.<br /> <br />
Similar to GOVERNOR MENU point A here we will only get some status information. At GOVERNOR MENU point D the different activation points of the Governor will be displayed based on color and state of the Status-LED. So you can prepare your transmitter for use with the Headspeed Governor function. The information conveyed by the Status-LED is basically the same in every Governor operation mode:
<p>Governor off = '''off''', Autorotation = <font color="purple">'''purple'''</font>, Gov active = <font color="#FF3300">'''red'''</font> or <font color="#0066FF">'''blue'''</font> (= max. RPM)</p>
However, the setup of the transmitter and the range of headspeed will be slightly different, depending on whether the mode '''electric''' or '''nitro''' is used.<br />
<br />
Translation Similar to GOVERNOR MENU point A here we will only get some status information. At GOVERNOR MENU point D the different activation points of the RPM Governor will be displayed based on color and state of the Status-LED. So you can prepare your transmitter for use with the Headspeed Governor function. The information conveyed by the Status-LED is basically the same in every Governor operation mode: <p>Governor off = '''off''', Autorotation = <font color="purple">'''purple'''</font>, Gov active = <font color="#FF3300">'''red'''</font> or <font color="#0066FF">'''blue'''</font> (= max. RPM)</p> However, the setup of the transmitter and the range of headspeed will be slightly different, depending on whether the mode '''electric''' or '''nitro''' is used.<br /> <br /> Similar to GOVERNOR MENU point A here we will only get some status information. At GOVERNOR MENU point D the different activation points of the RPM Governor will be displayed based on color and state of the Status-LED. So you can prepare your transmitter for use with the Headspeed Governor function. The information conveyed by the Status-LED is basically the same in every Governor operation mode:
Governor off = off , Autorotation = purple , Gov active = red or blue (= max. RPM)
However, the setup of the transmitter and the range of headspeed will be slightly different, depending on whether the mode electric or nitro is used.