Translations:Manuals:MBPlusFblV5:AttitudeControl/21/de: Difference between revisions

Revision as of 18:21, 1 February 2018

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Manuals:MBPlusFblV5:AttitudeControl)

{{TABLEV5|AttitudeControl operation mode
|AttitudeControl disabled
|Angular Mode
|Bail out rescue mode
|Bail out rescue mode with pitch
|3D - Mode
|3D - Mode with pitch
}}<br />
<br />
{{WARNING_QUOTE|Firstly enable AttitudeControl when all initial settings in SETUP MENU and RECEIVER MENU have been performed. Otherwise the servos may drive to the mechanical full stop, start binding and may get damaged, e.g. when AttitudeControl gets activated when leaving the menu and the system starts to try moving the heli.}}
<br />

Template:TABLEV5 DE

Aktiviere die AttitudeControl erst, wenn sämtliche Einstellungen in SETUP- und EMPFÄNGERMENÜ erfolgreich abgeschlossen wurden. Andernfalls könnten die Servos an den mechanischen Anschlag laufen und beschädigt werden, z.B. wenn die AttitudeControl nach Verlassen des PARAMETERMENÜ eingeschaltet wird und Korrekturbefehle an die Servos gibt.

Translations:Manuals:MBPlusFblV5:AttitudeControl/21/de: Difference between revisions

Revision as of 18:21, 1 February 2018

Navigation menu

Search