Difference between revisions of "Translations:Help:FAQ:Inflight/11/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 11:04, 27 February 2018

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Help:FAQ:Inflight)
=Status-LED flashes in operation mode, i.e. after landing.=
The flashing Status-LED shows that a software-reset occurred during operation.
* The receiver power supply does not seem to be sufficient. The voltage during operation dropped in a critical area (<3.5 Volts). Use a stable power supply and make sure that the wiring and plugs are dimensioned big enough and feature low contact resistance. On large helicopters we recommend to use the AR7300BX with high power input.
* A reset can be triggered due to a transfer of high voltage. Take measures to prevent static discharges.<br />
<br />
<br />
Translation=Status-LED flashes in operation mode, i.e. after landing.=
The flashing Status-LED shows that a software-reset occurred during operation.
* The receiver power supply does not seem to be sufficient. The voltage during operation dropped in a critical area (<3.5 Volts). Use a stable power supply and make sure that the wiring and plugs are dimensioned big enough and feature low contact resistance. On large helicopters we recommend to use the AR7300BX with high power input.
* A reset can be triggered due to a transfer of high voltage. Take measures to prevent static discharges.<br />
<br />
<br />

Status-LED flashes in operation mode, i.e. after landing.

The flashing Status-LED shows that a software-reset occurred during operation.

  • The receiver power supply does not seem to be sufficient. The voltage during operation dropped in a critical area (<3.5 Volts). Use a stable power supply and make sure that the wiring and plugs are dimensioned big enough and feature low contact resistance. On large helicopters we recommend to use the AR7300BX with high power input.
  • A reset can be triggered due to a transfer of high voltage. Take measures to prevent static discharges.



Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Help:FAQ:Inflight/11/en&oldid=15083"