Difference between revisions of "Translations:Help:FAQ:Inflight/7/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 11:04, 27 February 2018

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Help:FAQ:Inflight)
=The tail of the heli turns around instantly when doing backwards flying.=
* Tail gyro gain too low. Increase tail gyro gain as described in the manual and make sure you're using the tail gyro in HeadingLock mode (using "Rate-Mode" it is nearly impossible to perform backwards maneuvers!).
* No sufficient thrust produced by the tail rotor. Check tail pitch angles. Reduce the maximum amount of available tail pitch throw at SETUP MENU point E to prevent the tail blades from stalling or increase the tail pitch angle if it's too small. Use larger tail rotor blades or from another brand and increase the rotor speed.<br />
<br />
<br />
Translation=The tail of the heli turns around instantly when doing backwards flying.=
* Tail gyro gain too low. Increase tail gyro gain as described in the manual and make sure you're using the tail gyro in HeadingLock mode (using "Rate-Mode" it is nearly impossible to perform backwards maneuvers!).
* No sufficient thrust produced by the tail rotor. Check tail pitch angles. Reduce the maximum amount of available tail pitch throw at SETUP MENU point E to prevent the tail blades from stalling or increase the tail pitch angle if it's too small. Use larger tail rotor blades or from another brand and increase the rotor speed.<br />
<br />
<br />

The tail of the heli turns around instantly when doing backwards flying.

  • Tail gyro gain too low. Increase tail gyro gain as described in the manual and make sure you're using the tail gyro in HeadingLock mode (using "Rate-Mode" it is nearly impossible to perform backwards maneuvers!).
  • No sufficient thrust produced by the tail rotor. Check tail pitch angles. Reduce the maximum amount of available tail pitch throw at SETUP MENU point E to prevent the tail blades from stalling or increase the tail pitch angle if it's too small. Use larger tail rotor blades or from another brand and increase the rotor speed.