Translations:Help:FAQ:Startup/2/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
FuzzyBot (talk | contribs)
8,042 edits
Importing a new version from external source
 
(No difference)

Latest revision as of 13:15, 27 February 2018

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Help:FAQ:Startup)
=The SPEKTRUM AR7200BX / AR7210BX / AR7300BX does not finish initialization. What can I do?=
Watch the running LED lights during the init phase: If the lights A - G light up the sensor's rest positions are being calibrated, H - N show determining the RC channels and their center positions.<br />
<br />
AR7200BX / AR7300BX: Initially the chase is from A - N. If one step is done the indication light for this step will quit running.<br />
AR7210BX: Initially the chase is from H - N (Stick calibration). Only if this step is finished the chase from A - G (Sensor calibration) will start.<br />
<br />
When LEDs A - G do not quit running
* The sensors register movement and calibration of rest position can not be finished. Make sure the unit/the helicopter does not get moved e.g. by wind gusts or people leaning on your work bench where the heli is standing on.
* Sensors damaged. Return the device for repair.
* Power supply voltage is dropping due to weak power supply or damaged servos.<br />
<br />
When LEDs H - N do not quit running
* Is the transmitter switched on?
* Check whether your transmitter is correctly bound to the system.
* Keep at least 1m/3ft distance between transmitter and receiver<br />
<br />
<br />

The SPEKTRUM AR7200BX / AR7210BX / AR7300BX does not finish initialization. What can I do?

Watch the running LED lights during the init phase: If the lights A - G light up the sensor's rest positions are being calibrated, H - N show determining the RC channels and their center positions.

AR7200BX / AR7300BX: Initially the chase is from A - N. If one step is done the indication light for this step will quit running.
AR7210BX: Initially the chase is from H - N (Stick calibration). Only if this step is finished the chase from A - G (Sensor calibration) will start.

When LEDs A - G do not quit running

  • The sensors register movement and calibration of rest position can not be finished. Make sure the unit/the helicopter does not get moved e.g. by wind gusts or people leaning on your work bench where the heli is standing on.
  • Sensors damaged. Return the device for repair.
  • Power supply voltage is dropping due to weak power supply or damaged servos.


When LEDs H - N do not quit running

  • Is the transmitter switched on?
  • Check whether your transmitter is correctly bound to the system.
  • Keep at least 1m/3ft distance between transmitter and receiver



Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Help:FAQ:Startup/2/en&oldid=15144"