Translations:Help:StudioX/10/de: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
Newer edit →
Created page with "==StudioXm findet kein BLE2SYS Bluetooth Interface, wenn ich die Geräteliste aktualisiere== * Stelle sicher, dass Bluetooth bei deinem Smartphone/Tablet eingeschaltet ist. *..."
(No difference)

Revision as of 05:20, 7 May 2018

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Help:StudioX)
==StudioXm doesn't find the BLE2SYS bluetooth interface ==
* Make sure bluetooth is switched on at your smartphone/tablet/computer.
* Do NOT connect to the BLE2SYS device using the bluetooth menu of your smartphone/tablet, StudioXm will establish connection by itself!
* BLE2SYS uses bluetooth smart (bluetooth LE), make sure your mobile device supports this specific bluetooth protocol.
*Make sure the LED on the BLE2SYS flashes slow and steady. By default the interface deactivates after 30 seconds whe there is no connection. In this case the LED is off. You have to cylce power in order to reactivate the device.
* Click "Rescan" to start searching for bluetooth device in StudioX. Usually you should see some device called "BLE2SYS". But the name can be different especially when you've bought a used device from someone else. There can be other devices with long numbers like "Unknown{(12345....)}". Do not try to connect to those, these are different bluetooth devices around that can't be indentified.
* When the device list is empty, check if Studiox is allowed to use bluetooth (location) in the phone settings
* When there is a device named "HMSOFT" probably your BLE2SYS hasn't been programmed in factory correctly. Please follow steps as described [[Help:StudioX:HMSoft/en|here (click)]] in order to get your BLE2SYS working or send it back to your dealer for inspection.
<br />

StudioXm findet kein BLE2SYS Bluetooth Interface, wenn ich die Geräteliste aktualisiere

  • Stelle sicher, dass Bluetooth bei deinem Smartphone/Tablet eingeschaltet ist.
  • BLE2SYS verwendet das Bluetooth Smart (Bluetooth LE) Protokoll, stelle sicher, dass Dein Endgerät dieses Protokoll unterstützt
  • Die LED am BLE2SYS muss in 2 sekündigen Abständen aufblitzen. Standardmäßig deaktiviert sich das Interface, wenn nicht innerhalb von 30 Sekunden eine Verbindung aufgebaut wird. In diesem Fall ist die LED aus und Du musst es ab- und wieder anstecken, um es zu reaktivieren.



Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Help:StudioX/10/de&oldid=15305"