Changes

To select the desired rudder servo pulse width (servo type) move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point C:<br />

To select the desired rudder servo pulse width (servo type) move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point C:<br />

<br />

<br />

{{TABLEV5|Rudder servo center pulse length|960|760|1520}}<br />

{{TABLEV5|Rudder servo center pulse length|760|960|1520}}<br />

'''Note:''' When you set a different pulse width using the StudioX or StudioXm App the Status LED will be '''off'''. You can change back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!<br />

'''Note:''' When you've set a different pulse width using the StudioXm App the Status LED will be '''off'''. You can change back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!<br />

<br />

<br />

<br />

<br />