− | Initially the swashplate will be leveled and rotorblades will have 0 degrees of pitch when the cyclic throw adjustment screen opens. Attach your pitch gauge at the rotorblade or blade grip, calibrate it to 0 degrees and then click the '''Measure button'''. This will move the rotorblade into measuring position. Now check the pitch gauge, we want to see exactly +-6.0 degrees. Increase/decrease the throw value with the '''+''' and '''- buttons''' or the '''dial''' until the pitch is adjusted correctly.<br />
| + | Zu Beginn steht die Taumelscheibe waagrecht und die Rotorblätter sollten 0 Grad Pitchanstellwinkel haben. Befestige eine Pitcheinstelllehre am Blattgriff oder Rotorblatt und kalibriere diese auf 0. Wähle dann '''Messen''', so dass die Taumelscheibe in Messposition fährt. Prüfe jetzt, ob die Pitchlehre +-6.0 Grad Pitch anzeigt und vergrößere/reduziere den Wert (falls nötig) mit '''+''' und '''-''' oder über das '''Drehrad'''. Zwischen der Mess- und Neutralposition kann dabei beliebig oft umgeschaltet werden.<br /> |