Manuals:MBPlusFblV5:BankSwitch: Difference between revisions

(5 intermediate revisions by the same user not shown)

Line 1:

{{TOC_MBPlusV5|Manuals:MBPlusFblV5:AttitudeControl/en|~~StudioX_UpdateInstructions~~/en}}

{{TOC_MBPlusV5|Manuals:MBPlusFblV5:AttitudeControl/en|Manuals:MBPlusFblV5:FactoryReset/en}}

__TOC__

Line 33:

|}

Following the Bank display you will see the AttitudeControl display for additional 4 seconds. When LED A flashes AttitudeControl is off, otherwise one of the Menu LEDs B - N shows the amount of AttitudeControl gain, see [[Manuals:MBPlusFblV5:AttitudeControl|AttitudeControl instructions]] for further informations.

Following the Bank display you will see the AttitudeControl display for additional 4 seconds. When LED A flashes AttitudeControl is off, otherwise one of the Menu LEDs B - N shows the amount of AttitudeControl gain, see [[Manuals:MBPlusFblV5:AttitudeControl/en|AttitudeControl instructions]] for further informations.

In order to use bank switching in flight either you can assign a 3 - position switch on your transmitter to the gyro channel (which is used for bank switching now) and select banks randomly or you can link the gyro channel with you flight mode switch, so that the parameter banks are set automatically for each flight mode.

'''Using a 3-Position switch to toggle parameter banks'''

{|class="gallery" style="font-style: italic; font-size: x-small;"

|-

|-

| width="200pt" style="padding:0px 20px; vertical-align: top;" | Assign a switch to the gyro channel...

| width="200pt" style="padding:0px 20px; vertical-align: top;" | ... here we use switch G

| width="200pt" style="padding:0px 20px; vertical-align: top;" | In the servo monitor you can see how the switch changes the output of gyro channel

|-

|-

| width="200pt" style="padding:0px 20px; vertical-align: top;" | 0% (=Bank 2)

| width="200pt" style="padding:0px 20px; vertical-align: top;" | -100% (=Bank 3)

| width="200pt" style="padding:0px 20px; vertical-align: top;" | If you like to inverse the switch direction just reverse the gyro channel in your transmitter

|}

'''Using the flight mode system of your radio to automatically switch parameter banks'''

{|class="gallery" style="font-style: italic; font-size: x-small;"

|-

|-

| width="200pt" style="padding:0px 20px; vertical-align: top;" | Activate the gyro function in your transmitter...

| width="200pt" style="padding:0px 20px; vertical-align: top;" | ... and use the flightmodes to control the gyro channel. Set the values to select banks for each flight mode as necessary.

| width="200pt" style="padding:0px 20px; vertical-align: top;" | As already mentioned use the servo monitor and the display on the device to check whether everything is working as expected.

|}

Line 45:

Line 81:

==Setting Bank Switching with StudioX~~== ~~

=Setting Bank Switching with StudioX=

Choose the tab "Parameter (1)" and click the button "Activate" once, next to where it says "Bank Switching". It can take some short amount of time until the data is updated, then the adjustments for the gains as well as the tabs "Parameter (2)" and "Parameter (3)" will be unlocked. On the status bar at the bottom you can see that the gyro gain indicator changes into a flightmode/bank indicator. The button text also has changed to "Deactivate" now (if you click it again bank switching will be disabled and everything as decribed above will be rolled back).

~~ ~~

When you've set a separate control channel for the AttitudeControl function in "Control setup" you will see the message "AttitudeControl uses separate channel" at the bottom, next to the AttitudeControl gain adjustment. The adjustment will be locked in this case as you will still be able to separately activate/deactivate the AttitudeControl using your additional switch channel. Only you can use Bank Switching then to change between different rescue modes in flight. On the other hand when you did not assign a separate channel for the AttitudeControl, you can set the AttitudeControl gain for each bank/flight mode and use the Banks/flight modes to activate/deactivate the rescue in flight. Note that AttitudeControl will enable when the gain is higher than 12! Check the status bar at the bottom or the display on the device to see when AttitudeControl is activated or not!

~~ ~~

~~==Setting Bank Switching with StudioXm=~~=

When StudioXm has connected to your MICROBEAST PLUS in the device overview main screen click the "Parameter" button. Then click the "Next" button repeatedly until you reach the screen "Bank 1 - Gains" or directly go to this options screen using the box on top. Here you can aktivate Bank Switching clicking the specific button below the gain adjustments. When Bank switching is activated the following screens are accessible and can be used to change parameters of each of the Banks 2 & 3 besides the Paramters of Bank 1 in the beginning.

@@ Line 1: / Line 1: @@
 <translate>
 <!--T:1-->
-{{TOC_MBPlusV5|Manuals:MBPlusFblV5:AttitudeControl/en|StudioX_UpdateInstructions/en}}
+{{TOC_MBPlusV5|Manuals:MBPlusFblV5:AttitudeControl/en|Manuals:MBPlusFblV5:FactoryReset/en}}
 {{DISPLAYTITLE:Bank Switching (optional)|noerror}}
 __TOC__
@@ Line 33: / Line 33: @@
 |}
 <br />
-Following the Bank display you will see the AttitudeControl display for additional 4 seconds. When LED A flashes AttitudeControl is off, otherwise one of the Menu LEDs B - N shows the amount of AttitudeControl gain, see [[Manuals:MBPlusFblV5:AttitudeControl|AttitudeControl instructions]] for further informations.<br />
+Following the Bank display you will see the AttitudeControl display for additional 4 seconds. When LED A flashes AttitudeControl is off, otherwise one of the Menu LEDs B - N shows the amount of AttitudeControl gain, see [[Manuals:MBPlusFblV5:AttitudeControl/en|AttitudeControl instructions]] for further informations.<br />
 <br />
 In order to use bank switching in flight either you can assign a 3 - position switch on your transmitter to the gyro channel (which is used for bank switching now) and select banks randomly or you can link the gyro channel with you flight mode switch, so that the parameter banks are set automatically for each flight mode.<br />
+<br />
+<!--T:7-->
+'''Using a 3-Position switch to toggle parameter banks'''
+{|class="gallery" style="font-style: italic; font-size: x-small;"
+|-
+| width="200pt" style="padding:0px 20px;" align="center"| [[Image:Spektrum_ChannelInputConfig.png|192px|none|border]]
+| width="200pt" style="padding:0px 20px;" align="center"| [[Image:Spektrum_OptionChannelAssignGearSwitch.png|192px|none|border]]
+| width="200pt" style="padding:0px 20px;" align="center"| [[Image:Spektrum_ServoTravel_Gyro100.png|192px|none|border]]
+|-
+| width="200pt" style="padding:0px 20px; vertical-align: top;" | Assign a switch to the gyro channel...
+| width="200pt" style="padding:0px 20px; vertical-align: top;" | ... here we use switch G
+| width="200pt" style="padding:0px 20px; vertical-align: top;" | In the servo monitor you can see how the switch changes the output of gyro channel<br /><br />
+|-
+| width="200pt" style="padding:0px 20px;" align="center"| [[Image:Spektrum_ServoTravel_Gyro0.png|192px|none|border]]
+| width="200pt" style="padding:0px 20px;" align="center"| [[Image:Spektrum_ServoTravel_GyroMinus100.png|192px|none|border]]
+| width="200pt" style="padding:0px 20px;" align="center"| [[Image:Spektrum_ServoReverseGyro.png|x100px|192px|none|border]]
+|-
+| width="200pt" style="padding:0px 20px; vertical-align: top;" | 0% (=Bank 2)
+| width="200pt" style="padding:0px 20px; vertical-align: top;" | -100% (=Bank 3)
+| width="200pt" style="padding:0px 20px; vertical-align: top;" | If you like to inverse the switch direction just reverse the gyro channel in your transmitter
+|}<br />
+<br />
+<!--T:8-->
+'''Using the flight mode system of your radio to automatically switch parameter banks'''
+{|class="gallery" style="font-style: italic; font-size: x-small;"
+|-
+| width="200pt" style="padding:0px 20px;" align="center"| [[Image:Spektrum_GyroDisabled.png|192px|none|border]]
+| width="200pt" style="padding:0px 20px;" align="center"| [[Image:Spektrum GyroSwitchFlightMode.png|192px|none|border]]
+| width="200pt" style="padding:0px 20px;" align="center"| [[Image:Spektrum_ServoTravel_Gyro100.png|x100px|192px|none|border]]
+|-
+| width="200pt" style="padding:0px 20px; vertical-align: top;" | Activate the gyro function in your transmitter...
+| width="200pt" style="padding:0px 20px; vertical-align: top;" | ... and use the flightmodes to control the gyro channel. Set the values to select banks for each flight mode as necessary.
+| width="200pt" style="padding:0px 20px; vertical-align: top;" | As already mentioned use the servo monitor and the display on the device to check whether everything is working as expected.
+|}<br />
 <br />
@@ Line 45: / Line 81: @@
 <br />
-==Setting Bank Switching with StudioX== <!--T:5-->
+=Setting Bank Switching with StudioX= <!--T:6-->
-Choose the tab "Parameter (1)" and click the button "Activate" once, next to where it says "Bank Switching". It can take some short amount of time until the data is updated, then the adjustments for the gains as well as the tabs "Parameter (2)" and "Parameter (3)" will be unlocked. On the status bar at the bottom you can see that the gyro gain indicator changes into a flightmode/bank indicator. The button text also has changed to "Deactivate" now (if you click it again bank switching will be disabled and everything as decribed above will be rolled back).<br />
-<br />
-When you've set a separate control channel for the AttitudeControl function in "Control setup" you will see the message "AttitudeControl uses separate channel" at the bottom, next to the AttitudeControl gain adjustment. The adjustment will be locked in this case as you will still be able to separately activate/deactivate the AttitudeControl using your additional switch channel. Only you can use Bank Switching then to change between different rescue modes in flight. On the other hand when you did not assign a separate channel for the AttitudeControl, you can set the AttitudeControl gain for each bank/flight mode and use the Banks/flight modes to activate/deactivate the rescue in flight. Note that AttitudeControl will enable when the gain is higher than 12! Check the status bar at the bottom or the display on the device to see when AttitudeControl is activated or not!
-<br />
-<br />
-==Setting Bank Switching with StudioXm== <!--T:6-->
 When StudioXm has connected to your MICROBEAST PLUS in the device overview main screen click the "Parameter" button. Then click the "Next" button repeatedly until you reach the screen "Bank 1 - Gains" or directly go to this options screen using the box on top. Here you can aktivate Bank Switching clicking the specific button below the gain adjustments. When Bank switching is activated the following screens are accessible and can be used to change parameters of each of the Banks 2 & 3 besides the Paramters of Bank 1 in the beginning.<br />
 <br />

Manuals:MBPlusFblV5:BankSwitch: Difference between revisions

Navigation menu

Search