Translations:Manuals:MBPlusFblV5:Parametermenu/13/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
FuzzyBot (talk | contribs)
Importing a new version from external source
 
FuzzyBot (talk | contribs)
Importing a new version from external source
 
Line 3: Line 3:
<br />
<br />
{{TABLEV5|Throttle response
{{TABLEV5|Throttle response
|soft
|normal
|normal
|slightly increased
|slightly increased
Line 8: Line 9:
|aggressive
|aggressive
|very aggressive
|very aggressive
|soft
}}<br />
}}<br />
<br />
<br />

Latest revision as of 11:47, 3 December 2018

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV5:Parametermenu)
==Throttle response (I)==
Use PARAMETER MENU point I to change the response of the internal Governor control. This determines how fast and how far the system will open the throttle when the rotor speed changes. Ideally the response is set as high as possible. If it is too low, the main rotor will speed up in unloaded conditions as the system reduces throttle not quick enough. Also the internal Governor will increase throttle very cautious when the rotor is loaded, so that the head speed will drop. If on the other hand the response is set too high, the throttle may stutter audible and the throttle will kick in very hard. So the motor speed will overshoot when the rotor head is loaded. This will make the headspeed even more inconsistent than with a lower setting. The height of throttle response highly depends on factors such as heli size (blade size), motor power and performance and/or the throttle reponse behavior of the speed controller (when flying an electric heli). If you need to adjust the throttle response, we recommend to start with the lowest value and increase stepwise just until you get the most consistent rotor head speed. Having a heli with good motor power and a fast responding speed controller (on electric helis) typically allows to have high throttle response values (up to "very aggressive" setting) which will give very consistent head speed. Helis with not so much power (small nitros, gasser, scale helis) prefer low throttle response settings for a softer throttle management.<br />
<br />
{{TABLEV5|Throttle response
|soft
|normal
|slightly increased
|increased
|aggressive
|very aggressive
}}<br />
<br />

Throttle response (I)

Use PARAMETER MENU point I to change the response of the internal Governor control. This determines how fast and how far the system will open the throttle when the rotor speed changes. Ideally the response is set as high as possible. If it is too low, the main rotor will speed up in unloaded conditions as the system reduces throttle not quick enough. Also the internal Governor will increase throttle very cautious when the rotor is loaded, so that the head speed will drop. If on the other hand the response is set too high, the throttle may stutter audible and the throttle will kick in very hard. So the motor speed will overshoot when the rotor head is loaded. This will make the headspeed even more inconsistent than with a lower setting. The height of throttle response highly depends on factors such as heli size (blade size), motor power and performance and/or the throttle reponse behavior of the speed controller (when flying an electric heli). If you need to adjust the throttle response, we recommend to start with the lowest value and increase stepwise just until you get the most consistent rotor head speed. Having a heli with good motor power and a fast responding speed controller (on electric helis) typically allows to have high throttle response values (up to "very aggressive" setting) which will give very consistent head speed. Helis with not so much power (small nitros, gasser, scale helis) prefer low throttle response settings for a softer throttle management.

Status-LED Throttle response
off soft
purple normal
red flashing slightly increased
red increased
blue flashing aggressive
blue very aggressive