Bureaucrats, Administrators, translate-proofr
15,722
edits
Changes
Jump to navigation
Jump to search
Line 7:
Line 7: − + Line 14:
Line 14: − A single-line receiver bundles the control information to data packages or serialized electical signals. So it is not clear, which channel controls which (stick) function and it is mandatory to define the function assignment for the receiver output channels. For each specific type of receiver/radio brand there is an appropriate channel allocation preset in MICROBEAST PLUS. This preset can be loaded during receiver setup later onwards. In case the presets do not fit your radio system, also you can teach the assignments individually.<br /> − <br />
no edit summary
<!--T:2-->
<!--T:2-->
<p>Due to the possibility of connecting very different types of receivers with different types of signal output, you must setup the receiver type in the RECEIVER MENU. Additionally when using a single-line receiver it is mandatory to define the function assignment for the receiver output channels as the single-line receiver packs the control information together and it is not clear, which channel controls which (stick) function. Finally when using a single-line receiver you have to set a failsafe position for the throttle channel. This defines at which position the motor is disabled and where to move the throttle in case the receiver is not sending any throttle signal, i.e. during power up or in case of loss of radio link.</p>
<p>Due to the possibility of connecting very different types of receivers with different types of signal output, you must setup the receiver type in the RECEIVER MENU. Additionally when using a single-line receiver it is mandatory to define the function assignment for the receiver output channels. A single-line receiver bundles the control information to data packages or serialized electical signals. So by default it is not clear, which channel controls which (stick) function. Finally when using a single-line receiver you have to set a failsafe position for the throttle channel. This defines at which position the motor is disabled and where to move the throttle in case the receiver is not sending any throttle signal, i.e. during power up or in case of loss of radio link.</p>
<br />
<br />
{{QUOTE|By default the "Standard Receiver" is selected as receiver type. So if you're using this type of receiver and your MICROBEAST PLUS is brand new, you can skip this section as it is already setup correctly!}}<br />
{{QUOTE|By default the "Standard Receiver" is selected as receiver type. So if you're using this type of receiver and your MICROBEAST PLUS is brand new, you can skip this section as it is already setup correctly!}}<br />
=Preset function assignments for Single-line receivers= <!--T:20-->
=Preset function assignments for Single-line receivers= <!--T:20-->
<!--T:11-->
<!--T:11-->