Latest revision as of 13:09, 20 October 2020
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV52:Setupmenu H )
=Adjustment on the device=
=Adjustment on the device=
By tapping the '''rudder''' stick you can '''select one servo after another'''. Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. (You can switch back and forth between the servos as often as you need.) When you tap the '''aileron''' stick once, the selected servo will '''reverse its direction'''.<br />
<br />
{|cellpadding="4" cellspacing="0" border="1"
| style="width:100px; text-align:left;" | '''Status-LED''' || style="text-align:center;" | '''Servo reverse'''
|-
| style="color:white; background-color:#CC66CC" | purple || CH1 – elevator servo
|-
|style="color:white; background-color:#FF3300" | red ||CH2 – aileron(1) servo
|-
| style="color:white; background-color:#0066FF" | blue || CH3 – aileron(2) <!-- no pitch servo as this step is not provided for mCCPM! -->
|-
| style="color:white; background: linear-gradient(to right, #FF3300, black, #0066FF)" | red/blue || CH7 – elevator servo(2) (90° eCCPM only)
|}<br />
<br />
<br /> Translation =Adjustment on the device= Adjustment on the device By tapping the rudder stick you can select one servo after another . Every color of the Status-LED is corresponding to a specific servo channel that is indicating its selection by a short up and down move. (You can switch back and forth between the servos as often as you need.) When you tap the aileron stick once, the selected servo will reverse its direction .
Status-LED Servo reverse
purple
CH1 – elevator servo
red
CH2 – aileron(1) servo
blue
CH3 – aileron(2)
red/blue
CH7 – elevator servo(2) (90° eCCPM only)