Latest revision as of 13:52, 20 October 2020
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV52:Governor )
==Electric drive system with rpm signal output from the speed controller==
==Electric drive system with rpm signal output from the speed controller==
When a speed controller is used that provides a rpm signal output you can alternatively use the [RPM] sensor input on the front connection board of MICROBEAST PLUS (lowest pin of the tripple signal input). (RPM sensors can‘t be connected here as this pin header does not provide any power supply!)
The speed controller‘s signal input wire is plugged into the output [CH5] as usual.<br />
<br />
[[Image:Governormenu_A_ESC_signalwire.png|500px|none]]<br />
<br /> Translation ==Electric drive system with rpm signal output from the speed controller== Electric drive system with rpm signal output from the speed controller When a speed controller is used that provides a rpm signal output you can alternatively use the [RPM] sensor input on the front connection board of MICROBEAST PLUS (lowest pin of the tripple signal input). (RPM sensors can‘t be connected here as this pin header does not provide any power supply!)
The speed controller‘s signal input wire is plugged into the output [CH5] as usual.
