Translations:Manuals:MBPlusFblV52:Setupmenu J/7/de: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
Newer edit →
Created page with "==Trimmen der Taumelscheibe== Falls notwendig, kann auch die Position der Taumelscheibe getrimmt werden. Dazu drücke und halte den Einstellknopf bei SETUPMENÜ Punkt J mindes..."
(No difference)

Revision as of 08:23, 22 April 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV52:Setupmenu J)
==Trimming the swashplate==
If necessary, you can also trim the swashplate position at once. For this push and hold the button for at least 2 seconds when at Setup Menu Point J, then release. The servos will move in a circular manner to indicate the trimming mode has changed. Now you can trim the swashplate into each direction by tapping or holding aileron or elevator. The collective pitch can be trimmed up and down with the rudder stick.<br />
<br />
In order to get back to the single servo trim, again push and hold the button for 2 seconds! The elevator servo [CH1] will make a movement two show the mode was switched.<br />
<br />
<br />

Trimmen der Taumelscheibe

Falls notwendig, kann auch die Position der Taumelscheibe getrimmt werden. Dazu drücke und halte den Einstellknopf bei SETUPMENÜ Punkt J mindestens 2 Sekunden lang und lass dann los. Jetzt kann durch Antippen des Roll-/Nicksteuerknüppels in die jeweilige Richtung getrimmt werden. Das Pitch kann über den Hecksteuerknüppel getrimmt werden.


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBPlusFblV52:Setupmenu_J/7/de&oldid=18490"